Jump to content

Template:Infobox settlement/doc

Add links
From New Territories

{{#ifeq:doc |doc 

    |

{{#ifeq:show |show 

         | Template:Mbox
        }}{{#if: |
         |   {{#ifexist:Template:Infobox settlement
                  | [[Category:{{#switch:Template |Template=Template |Module=Module |User=User |#default=Wikipedia}} documentation pages]]
                  | 
                 }}
        }}
    | 
   }}

Lua error: Internal error: The interpreter exited with status 127.Lua error: Internal error: The interpreter exited with status 127. Lua error: Internal error: The interpreter exited with status 127. Lua error: Internal error: The interpreter exited with status 127. Lua error: Internal error: The interpreter exited with status 127. Lua error: Internal error: The interpreter exited with status 127.{{#switch:doc |sandbox |testcases |doc= |#default={{#switch: 

 {{#if:
 | {{{demospace}}}    
 | {{#ifeq:Template|Module
   | module
   | other
   }}
 }}

| module = | other | #default = {{#switch: 

 {{#if:
 | {{{demospace}}}    
 | {{#ifeq:Template|Template
   | template
   | other
   }}
 }}

| template = | other | #default = }} }} }}

This template should be used to produce an Infobox for human settlements (cities, towns, villages, communities) as well as other administrative districts, counties, provinces, et cetera—in fact, any subdivision below the level of a country, for which {{Infobox country}} should be used. Parameters are described in the table below. For questions, see the talk page. For a US city guideline, see WP:USCITIES.

The template is aliased or used as a sub-template for several infobox front-end templates.

Usage

[edit source]
  • Important: Please enter all numeric values in a raw, unformatted fashion. References and {{citation needed}} tags are to be included in their respective section footnotes field. Numeric values that are not "raw" may create an "Expression error". Raw values will be automatically formatted by the template. If you find a raw value is not formatted in your usage of the template, please post a notice on the discussion page for this template.
  • An expression error may also occur when any coordinate parameter has a value, but one or more coordinate parameters are blank or invalid.
  • To specify CSS class "X" should be applied to an image, append to the filename: {{!}}class=X

Basic blank template, ready to cut and paste. See the next section for a copy of the template with all parameters and comments. See the table below that for a full description of each parameter.

Using metric units

[edit source]

<syntaxhighlight lang="wikitext" style="overflow:auto"> {{#switch: 

 {{#if: 
 | {{{demospace}}}    
 | {{#ifeq:Template|
   | main
   | other
   }} 
 }}

| main = Script error: No such module "Settlement short description". | other | #default = }}Lua error: Internal error: The interpreter exited with status 127.{{#switch: 

 {{#if:
 | {{{demospace}}}    
 | {{#ifeq:Template|Template
   | template
   | other
   }}
 }}

| template = {{#ifeq:Infobox settlement/doc|Infobox||{{#ifeq:docdocd|Infobox|}}}} | other | #default = }}Lua error: Internal error: The interpreter exited with status 127.Lua error: Internal error: The interpreter exited with status 127.{{#if: 

|

}}{{#switch: 

 {{#if: 
 | {{{demospace}}}    
 | {{#ifeq:Template|
   | main
   | other
   }} 
 }}

| main = {{#if:||}}{{#if:||}}{{#if:|{{#if:||}}}}{{#if:||}}{{#if:|{{#ifeq:|||}}|}}{{#if:|}}

| other | #default = }} </syntaxhighlight>

Using non-metric units

[edit source]

<syntaxhighlight lang="wikitext" style="overflow:auto"> {{#switch: 

 {{#if: 
 | {{{demospace}}}    
 | {{#ifeq:Template|
   | main
   | other
   }} 
 }}

| main = Script error: No such module "Settlement short description". | other | #default = }}Lua error: Internal error: The interpreter exited with status 127.{{#switch: 

 {{#if:
 | {{{demospace}}}    
 | {{#ifeq:Template|Template
   | template
   | other
   }}
 }}

| template = {{#ifeq:Infobox settlement/doc|Infobox||{{#ifeq:docdocd|Infobox|}}}} | other | #default = }}Lua error: Internal error: The interpreter exited with status 127.Lua error: Internal error: The interpreter exited with status 127.{{#if: 

|

}}{{#switch: 

 {{#if: 
 | {{{demospace}}}    
 | {{#ifeq:Template|
   | main
   | other
   }} 
 }}

| main = {{#if:||}}{{#if:||}}{{#if:|{{#if:||}}}}{{#if:||}}{{#if:|{{#ifeq:|||}}|}}{{#if:|}}

| other | #default = }} </syntaxhighlight>

Short version

[edit source]

<syntaxhighlight lang="wikitext" style="overflow:auto"> {{#switch: 

 {{#if: 
 | {{{demospace}}}    
 | {{#ifeq:Template|
   | main
   | other
   }} 
 }}

| main = Script error: No such module "Settlement short description". | other | #default = }}Lua error: Internal error: The interpreter exited with status 127.{{#switch: 

 {{#if:
 | {{{demospace}}}    
 | {{#ifeq:Template|Template
   | template
   | other
   }}
 }}

| template = {{#ifeq:Infobox settlement/doc|Infobox||{{#ifeq:docdocd|Infobox|}}}} | other | #default = }}Lua error: Internal error: The interpreter exited with status 127.Lua error: Internal error: The interpreter exited with status 127.{{#if: 

|

}}{{#switch: 

 {{#if: 
 | {{{demospace}}}    
 | {{#ifeq:Template|
   | main
   | other
   }} 
 }}

| main = {{#if:||}}{{#if:||}}{{#if:|{{#if:||}}}}{{#if:||}}{{#if:|{{#ifeq:|||}}|}}{{#if:|}}

| other | #default = }} </syntaxhighlight>

Complete empty syntax, with comments

[edit source]

This copy of the template lists all parameters except for some of the repeating numbered parameters which are noted in the comments. Comments here should be brief; see the table below for full descriptions of each parameter.

<syntaxhighlight lang="wikitext" style="overflow:auto;"> {{#switch: 

 {{#if: 
 | {{{demospace}}}    
 | {{#ifeq:Template|
   | main
   | other
   }} 
 }}

| main = Script error: No such module "Settlement short description". | other | #default = }}Lua error: Internal error: The interpreter exited with status 127.{{#switch: 

 {{#if:
 | {{{demospace}}}    
 | {{#ifeq:Template|Template
   | template
   | other
   }}
 }}

| template = {{#ifeq:Infobox settlement/doc|Infobox||{{#ifeq:docdocd|Infobox|}}}} | other | #default = }}Lua error: Internal error: The interpreter exited with status 127.Lua error: Internal error: The interpreter exited with status 127.{{#if: 

|

}}{{#switch: 

 {{#if: 
 | {{{demospace}}}    
 | {{#ifeq:Template|
   | main
   | other
   }} 
 }}

| main = {{#if:||}}{{#if:||}}{{#if:|{{#if:||}}}}{{#if:||}}{{#if:|{{#ifeq:|||}}|}}{{#if:|}}

| other | #default = }} </syntaxhighlight>

Parameter names and descriptions

[edit source]

Name and transliteration

[edit source]
Parameter name Usage Description
name optional This is the usual name in English. If it's not specified, the infobox will use the official_name as a title unless this too is missing, in which case the page name will be used.
official_name optional The official name in English. Avoid using official_name if it leads to redundancy with name and settlement_type. Use official_name if the official name is unusual or cannot be simply deduced from the name and settlement type.
native_name optional Name in the local language, if different from name, and if not English. In this case "native" does not mean indigenous but is related to de facto language that is not English. This will display below the name/official name.
native_name_lang optional Use ISO 639-1 code, e.g. "fr" for French. If there is more than one native name, in different languages, enter those names using {{lang}}, instead.
other_name optional For places with other commonly used names like Bombay or Saigon
settlement_type optional Any type can be entered, such as City, Town, Village, Hamlet, Municipality, Reservation, etc. If set, will be displayed under the names. Might also be used as a label for total population/area (defaulting to City), if needed to distinguish from Urban, Rural or Metro (if urban, rural or metro figures are not present, the label is Total unless total_type is set).
Transliteration(s)
translit_lang1 optional Will place the "entry" before the word "transliteration(s)". Can be used to specify a particular language like in Dêlêg or one may just enter "Other", like in Gaza's article.
translit_lang1_type
translit_lang1_type1
to
translit_lang1_type6		 optional
translit_lang1_info
translit_lang1_info1
to
translit_lang1_info6		 optional
translit_lang2 optional Will place a second transliteration. See Dêlêg
translit_lang2_type
translit_lang2_type1
to
translit_lang2_type6		 optional
translit_lang2_info
translit_lang2_info1
to
translit_lang2_info6		 optional

Images, nickname, motto

[edit source]
Parameter name Usage Description
Image
image_skyline optional Primary image representing the settlement. Commonly a photo of the settlement’s skyline. For large urban areas, the {{multiple image}} template is often used in place of a single image to create a collage of the settlement's skyline and several notable landmarks.
imagesize optional Can be used to tweak the size of the image_skyline up or down. This can be helpful if an editor wants to make the infobox wider. If used, px must be specified; default size is 250px. Note WP:IMGSIZELEAD recommends that images should be no wider than upright=1.35 -equivalent to 300px
image_alt optional Alt text for the image, used by visually impaired readers who cannot see the image. See WP:ALT.
image_caption optional Will place a caption under the image_skyline (if present)
Flag image
image_flag optional Used for a flag.
flag_size optional Can be used to tweak the size of the image_flag up or down from 100px as desired. If used, px must be specified; default size is 100px.
flag_alt optional Alt text for the flag.
flag_border optional Set to 'no' to remove the border from the flag
flag_link optional
Seal image
image_seal optional If the place has an official seal.
seal_size optional If used, px must be specified; default size is 100px.
seal_alt optional Alt text for the seal.
seal_link
seal_type		 optional
Coat of arms image
image_shield optional Can be used for a place with a coat of arms.
shield_size optional If used, px must be specified; default size is 100px.
shield_alt optional Alt text for the shield.
shield_link optional Can be used if a wiki article if known but is not automatically linked by the template. See Coquitlam, British Columbia's infobox for an example.
Logo or emblem image
image_blank_emblem optional Can be used if a place has an official logo, crest, emblem, etc.
blank_emblem_type optional Caption beneath "image_blank_emblem" to specify what type of emblem it is.
blank_emblem_size optional If used, px must be specified; default size is 100px.
blank_emblem_alt optional Alt text for blank emblem.
blank_emblem_link optional
Nickname, motto
etymology optional origin of name
nickname optional well-known nickname
nicknames optional if more than one well-known nickname, use this
motto optional Will place the motto under the nicknames
mottoes optional if more than one motto, use this
anthem optional Will place the anthem (song) under the nicknames

Maps, coordinates

[edit source]
Parameter name Usage Description
Map images
image_map optional
mapsize optional If used, px must be specified; default is 250px.
map_alt optional Alt text for map.
map_caption optional
image_map1 optional A secondary map image. The field image_map must be filled in first. Example see: Bloomsburg, Pennsylvania.
mapsize1 optional If used, px must be specified; default is 250px.
map_alt1 optional Alt text for secondary map.
map_caption1 optional
Pushpin map(s), coordinates
pushpin_map optional The name of a location map as per Template:Location map (e.g. Indonesia or Russia). The coordinate fields (from |{{SAFESUBST:#if:coordinates|coordinates=}}) position a pushpin coordinate marker and label on the map automatically. Example: Padang, Indonesia. To show multiple pushpin maps, provide a list of maps separated by #, e.g., California#USA
pushpin_mapsize optional Must be entered as only a number—do not use px. The default value is 250.
Equivalent to width parameter in Template:Location map.
pushpin_map_alt optional Alt text for pushpin map; used by screen readers, see WP:ALT.
Equivalent to alt parameter in Template:Location map.
pushpin_map_caption optional Fill out if a different caption from map_caption is desired.
Equivalent to caption parameter in Template:Location map.
pushpin_map_caption_notsmall optional
pushpin_label optional The text of the label to display next to the identifying mark; a wikilink can be used. If not specified, the label will be the text assigned to the name or official_name parameters (if |{{SAFESUBST:#if:pushpin_label_position|pushpin_label_position=}}none, no label is displayed).
Equivalent to label parameter in Template:Location map.
pushpin_label_position optional The position of the label on the pushpin map relative to the pushpin coordinate marker. Valid options are {left, right, top, bottom, none}. If this field is not specified, the default value is right.
Equivalent to position parameter in Template:Location map.
pushpin_outside optional Equivalent to outside parameter in Template:Location map.
pushpin_relief optional Set this to y or any non-blank value to use an alternative relief map provided by the selected location map (if a relief map is available).
Equivalent to relief parameter in Template:Location map.
pushpin_image optional Allows the use of an alternative map; the image must have the same edge coordinates as the location map template.
Equivalent to AlternativeMap parameter in Template:Location map.
pushpin_overlay optional Can be used to specify an image to be superimposed on the regular pushpin map.
Equivalent to overlay_image parameter in Template:Location map.
mapframe optional Add a {{infobox mapframe}} map. See the documentation below in #Mapframe maps for more details on usage.
coordinates optional Latitude and longitude. Use {{Coord}}. See the documentation for {{Coord}} for more details on usage.
coor_pinpoint optional If needed, to specify more exactly where (or what) coordinates are given (e.g. Town Hall) or a specific place in a larger area (e.g. a city in a county). Example: In the article Masovian Voivodeship, coor_pinpoint=Warsaw specifies Warsaw.
coordinates_footnotes optional Reference(s) for coordinates, placed within <ref> </ref> tags, possibly using the citing format at {{Cite web}}
grid_name
grid_position		 optional Name of a regional grid system and position on the regional grid

Location, established, seat, subdivisions, government, leaders

[edit source]
Parameter name Usage Description
Location
Lua error: Internal error: The interpreter exited with status 127.subdivision_type optional almost always Country
subdivision_name optional Depends on the subdivision_type — use the name in text form, sample: United States. Per MOS:INFOBOXFLAG, flag icons or flag templates may be used in this field
subdivision_type1
to
subdivision_type6		 optional parts_type=}}.
subdivision_name1
to
subdivision_name6		 optional Use the name in text form, sample: Florida or [[Florida]]. Per MOS:INFOBOXFLAG, settlements "may have flags of the country and first-level administrative subdivision in infoboxes". Flag icons or flag templates is permitted for subdivision_name1 (which is usually state or province); flag icons or flag templates should not be used in subdivision_name2-6.
Established
established_title optional Example: Founded
established_date optional Requires established_title=
established_title1 optional Example: Incorporated (town)
[Note that "established_title1" is distinct from "established_title"; you can think of "established_title" as behaving like "established_title0".]
established_date1 optional [See note for "established_title1".] Requires established_title1=
established_title2 optional Example: Incorporated (city)
established_date2 optional Requires established_title2=
established_title3 optional
established_date3 optional Requires established_title3=
established_title4 optional
established_date4 optional Requires established_title4=
established_title5 optional
established_date5 optional Requires established_title5=
established_title6 optional
established_date6 optional Requires established_title6=
established_title7 optional
established_date7 optional Requires established_title7=
extinct_title optional For when a settlement ceases to exist
extinct_date optional Requires extinct_title=
founder optional Who the settlement was founded by
named_for optional The source of the name of the settlement (a person, a place, et cetera)
Seat of government
seat_type optional The label for the seat of government (defaults to Seat).
seat optional The seat of government.
Smaller parts (e.g. boroughs of a city)
parts_type optional The label for the smaller subdivisions (defaults to Boroughs).
parts_style optional Set to list to display as a collapsible list, coll as a collapsed list, or para to use paragraph style. Default is list for up to 5 items, otherwise coll.
parts optional Text or header of the list of smaller subdivisions.
p1
p2
to
p50		 optional The smaller subdivisions to be listed. Example: Warsaw
Government type, leaders
government_footnotes optional Reference(s) for government, placed within <ref> </ref> tags, possibly using the citing format at {{Cite web}}
government_type optional Examples: Mayor–council government, Council–manager government, City commission government, ...
governing_body optional Name of the place's governing body
leader_party optional Political party of the place's leader
leader_title optional First title of the place's leader, e.g. Mayor
leader_name optional Name of the place's leader
leader_title1
to
leader_title4		 optional
leader_name1
to
leader_name4		 optional For long lists use {{Collapsible list}}. See Halifax for an example.

Geographic information

[edit source]
These fields have dual automatic unit conversion meaning that if only metric values are entered, the imperial values will be automatically converted and vice versa. If an editor wishes to over-ride the automatic conversion, e.g. if the source gives both metric and imperial or if a range of values is needed, they should enter both values in their respective fields. All values must be entered in a raw format: no commas, spaces, or unit symbols. The template will format them automatically.
Parameter name Usage Description
Display settings
total_type optional Specifies what "total" area and population figure refer to, e.g. Greater London. This overrides other labels for total population/area. To make the total area and population display on the same line as the words "Area" and "Population", with no "Total" or similar label, set the value of this parameter to &nbsp;.
unit_pref optional To change the unit order to imperial (metric), enter imperial. The default display style is metric (imperial). However, the template will swap the order automatically if the subdivision_name equals some variation of the US or the UK.
For the Middle East, a unit preference of dunam can be entered (only affects total area).
Area
area_footnotes optional Reference(s) for area, placed within <ref> </ref> tags, possibly using the citing format at {{Cite web}}
dunam_link optional If dunams are used, the default is to link the word dunams in the total area section. This can be changed by setting dunam_link to another measure (e.g. dunam_link=water). Linking can also be turned off by setting the parameter to something else (e.g. dunam_link=none or dunam_link=off).
area_total_km2 optional Total area in square kilometers—symbol: km2. Value must be entered in raw format, no commas or spaces. Auto-converted to display square miles if area_total_sq_mi is empty.
area_total_ha optional Total area in hectares—symbol: ha. Value must be entered in raw format, no commas or spaces. Auto-converted to display acres if area_total_acre is empty.
area_total_sq_mi optional Total area in square miles—symbol: sq mi. Value must be entered in raw format, no commas or spaces. Auto-converted to display square kilometers if area_total_km2 is empty.
area_total_acre optional Total area in acres. Value must be entered in raw format, no commas or spaces. Auto-converted to display hectares if area_total_ha is empty.
area_total_dunam optional Total area in dunams, which is wiki-linked. Used in middle eastern places like Israel, Gaza, and the West Bank. Value must be entered in raw format, no commas or spaces. Auto-converted to display square kilometers or hectares and square miles or acreds if area_total_km2, area_total_ha, area_total_sq_mi, and area_total_acre are empty. Examples: Gaza and Ramallah
area_land_km2 optional Land area in square kilometers—symbol: km2. Value must be entered in raw format, no commas or spaces. Auto-converted to display square miles if area_land_sq_mi is empty.
area_land_sq_mi optional Land area in square miles—symbol: sq mi. Value must be entered in raw format, no commas or spaces. Auto-converted to display square kilometers if area_land_km2 is empty.
area_land_ha optional similar to area_total_ha
area_land_dunam optional similar to area_total_dunam
area_land_acre optional similar to area_total_acre
area_water_km2 optional Water area in square kilometers—symbol: km2. Value must be entered in raw format, no commas or spaces. Auto-converted to display square miles if area_water_sq_mi is empty.
area_water_sq_mi optional Water area in square miles—symbol: sq mi. Value must be entered in raw format, no commas or spaces. Auto-converted to display square kilometers if area_water_km2 is empty.
area_water_ha optional similar to area_total_ha
area_water_dunam optional similar to area_total_dunam
area_water_acre optional similar to area_total_acre
area_water_percent optional percent of water without the "%"
area_urban_km2 optional
area_urban_sq_mi optional
area_urban_ha optional similar to area_total_ha
area_urban_dunam optional similar to area_total_dunam
area_urban_acre optional similar to area_total_acre
area_rural_km2 optional
area_rural_sq_mi optional
area_rural_ha optional similar to area_total_ha
area_rural_dunam optional similar to area_total_dunam
area_rural_acre optional similar to area_total_acre
area_metro_km2 optional
area_metro_sq_mi optional
area_metro_ha optional similar to area_total_ha
area_metro_dunam optional similar to area_total_dunam
area_metro_acre optional similar to area_total_acre
area_rank optional The settlement's area, as ranked within its parent sub-division
area_blank1_title optional Example see London
area_blank1_km2 optional
area_blank1_sq_mi optional
area_blank1_ha optional similar to area_total_ha
area_blank1_dunam optional similar to area_total_dunam
area_blank1_acre optional similar to area_total_acre
area_blank2_title optional
area_blank2_km2 optional
area_blank2_sq_mi optional
area_blank2_ha optional similar to area_total_ha
area_blank2_dunam optional similar to area_total_dunam
area_blank2_acre optional similar to area_total_acre
area_note optional A place for additional information such as the name of the source.
Dimensions
dimensions_footnotes optional Reference(s) for dimensions, placed within <ref> </ref> tags, possibly using the citing format at {{Cite web}}
length_km optional Raw number entered in kilometers. Will automatically convert to display length in miles if length_mi is empty.
length_mi optional Raw number entered in miles. Will automatically convert to display length in kilometers if length_km is empty.
width_km optional Raw number entered in kilometers. Will automatically convert to display width in miles if length_mi is empty.
width_mi optional Raw number entered in miles. Will automatically convert to display width in kilometers if length_km is empty.
Elevation
elevation_footnotes optional Reference(s) for elevation, placed within <ref> </ref> tags, possibly using the citing format at {{Cite web}}
elevation_m optional Raw number entered in meters. Will automatically convert to display elevation in feet if elevation_ft is empty. However, if a range in elevation (i.e. 5–50 m ) is desired, use the "max" and "min" fields below
elevation_ft optional Raw number, entered in feet. Will automatically convert to display the average elevation in meters if elevation_m field is empty. However, if a range in elevation (e.g. 50–500 ft ) is desired, use the "max" and "min" fields below
elevation_max_footnotes
elevation_min_footnotes		 optional Same as above, but for the "max" and "min" elevations. See City of Leeds.
elevation_max_m
elevation_max_ft
elevation_max_rank
elevation_min_m
elevation_min_ft
elevation_min_rank		 optional Used to give highest & lowest elevations and rank, instead of just a single value. Example: Halifax Regional Municipality.

Population, demographics

[edit source]
The density fields have dual automatic unit conversion meaning that if only metric values are entered, the imperial values will be automatically converted and vice versa. If an editor wishes to over-ride the automatic conversion, e.g. if the source gives both metric and imperial or if a range of values is needed, they can enter both values in their respective fields. To calculate density with respect to the total area automatically, type auto in place of any density value.
Parameter name Usage Description
Population
population_total optional Actual population (see below for estimates) preferably consisting of digits only (without any commas)
population_as_of optional The year for the population total (usually a census year)
population_footnotes optional Reference(s) for population, placed within <ref> </ref> tags
population_density_km2 optional
population_density_sq_mi optional
population_est optional Population estimate.
pop_est_as_of optional The year or month & year of the population estimate
pop_est_footnotes optional Reference(s) for population estimate, placed within <ref> </ref> tags
population_urban optional
population_urban_footnotes optional Reference(s) for urban population, placed within <ref> </ref> tags
population_density_urban_km2 optional
population_density_urban_sq_mi optional
population_rural optional
population_rural_footnotes optional Reference(s) for rural population, placed within <ref> </ref> tags
population_density_rural_km2 optional
population_density_rural_sq_mi optional
population_metro optional
population_metro_footnotes optional Reference(s) for metro population, placed within <ref> </ref> tags
population_density_metro_km2 optional
population_density_metro_sq_mi optional
population_rank optional The settlement's population, as ranked within its parent sub-division
population_density_rank optional The settlement's population density, as ranked within its parent sub-division
population_blank1_title optional Can be used for estimates. Example: Windsor, Ontario
population_blank1 optional The population value for blank1_title
population_density_blank1_km2 optional
population_density_blank1_sq_mi optional
population_blank2_title optional
population_blank2 optional
population_density_blank2_km2 optional
population_density_blank2_sq_mi optional
population_demonym optional A demonym or gentilic is a word that denotes the members of a people or the inhabitants of a place. For example, a citizen in Liverpool is known as a Liverpudlian.
population_demonyms optional If more than one demonym, use this
population_note optional A place for additional information such as the name of the source. See Windsor, Ontario for example.
Demographics (section 1)
demographics_type1 optional Section Header. For example: Ethnicity
demographics1_footnotes optional Reference(s) for demographics section 1, placed within <ref> </ref> tags, possibly using the citing format at {{Cite web}}
demographics1_title1
to
demographics1_title7		 optional Titles related to demographics_type1. For example: White, Black, Hispanic...
demographics1_info1
to
demographics1_info7		 optional Information related to the "titles". For example: 50%, 25%, 10%...
Demographics (section 2)
demographics_type2 optional A second section header. For example: Languages
demographics2_footnotes optional Reference(s) for demographics section 2, placed within <ref> </ref> tags, possibly using the citing format at {{Cite web}}
demographics2_title1
to
demographics2_title10		 optional Titles related to demographics_type2. For example: English, French, Arabic...
demographics2_info1
to
demographics2_info10		 optional Information related to the "titles" for type2. For example: 50%, 25%, 10%...

Other information

[edit source]
Parameter name Usage Description
Time zone(s)
timezone1 optional
utc_offset1 optional Plain text, e.g. "+05:00" or "-08:00". Auto-linked, so do not include references or additional text.
timezone1_DST optional
utc_offset1_DST optional
timezone2 optional A second timezone field for larger areas such as a Province.
utc_offset2 optional
timezone2_DST optional
utc_offset2_DST optional
Postal code(s) & area code
postal_code_type optional
postal_code optional
postal2_code_type optional
postal2_code optional
area_code_type optional If left blank/not used template will default to "Area code(s)"
area_code optional Refers to the telephone dialing code for the settlement, not a geographic area code.
area_codes optional If more than one area code, use this
geocode optional See Geocode
iso_code optional See ISO 3166
registration_plate_type optional If left blank/not used template will default to "Vehicle registration"
registration_plate optional See Vehicle registration plate
Blank fields (section 1)
blank_name_sec1 optional Fields used to display other information. The name is displayed in bold on the left side of the infobox.
blank_info_sec1 optional The information associated with the blank_name heading. The info is displayed on right side of infobox, in the same row as the name. For an example, see: Warsaw
blank1_name_sec1
to
blank7_name_sec1		 optional Up to 7 additional fields (8 total) can be displayed in this section
blank1_info_sec1
to
blank7_info_sec1		 optional
Blank fields (section 2)
blank_name_sec2 optional For a second section of blank fields
blank_info_sec2 optional Example: Beijing
blank1_name_sec2
to
blank7_name_sec2		 optional Up to 7 additional fields (8 total) can be displayed in this section
blank1_info_sec2
to
blank7_info_sec2		 optional
Website, footnotes
website optional External link to official website, use {{Official URL}} if Property P856 "official website" exists on Wikidata, or {{URL|example.com}}
module optional To embed infoboxes at the bottom of the infobox
footnotes optional Text to be displayed at the bottom of the infobox

Mapframe maps

[edit source]

Lua error: Internal error: The interpreter exited with status 127.

  • Basic parameters:{{#if:||
    • mapframe – Specify yes or no to show or hide the map, overriding the default. Default: Enabled (onByDefault) if none of the other map parameters are present: |{{SAFESUBST:#if:pushpin_map|pushpin_map=}}, |{{SAFESUBST:#if:image_map|image_map=}}, |{{SAFESUBST:#if:image_map1|image_map1=}}
    • mapframe-caption – Caption for the map. Default: blank (or if |{{SAFESUBST:#if:mapframe-geomask|mapframe-geomask=}} is set, "Location in geomask's label")
    • mapframe-custom – Use a custom map instead of the automatic mapframe. Specify either a Lua error: Internal error: The interpreter exited with status 127. template, or another template that generates a mapframe map, or an image name. If used, the subsequent mapframe parameters will be ignored. Default: not specified}}
    • {{#if:|id|mapframe-id or id or qid}} – Id (Q-number) of Wikidata item to use. Default: item for current page
    • {{#if:||mapframe-coordinates or mapframe-coord or}} coordinates or coord – Coordinates to use, instead of any on Wikidata. Use the {{Coord}} template, e.g. |{{SAFESUBST:#if:coord|coord=}}Lua error: Internal error: The interpreter exited with status 127.. Default: coordinates from Wikidata
    • {{#if:||mapframe-}}wikidata – Set to <syntaxhighlight lang="text" class="" style="" inline="1">yes</syntaxhighlight> to show shape/line features from the wikidata item, if any, when |{{SAFESUBST:#if:coord|coord=}} is set. Default: not specified
  • Customise which features are displayed:
    • {{#if:||mapframe-}}shape – Turn off display of shape feature by setting to <syntaxhighlight lang="text" class="" style="" inline="1">none</syntaxhighlight>. Use an inverse shape (geomask) instead of a regular shape by setting to <syntaxhighlight lang="text" class="" style="" inline="1">inverse</syntaxhighlight>. Default: not specified
    • {{#if:||mapframe-}}point – Turn off display of point feature by setting to <syntaxhighlight lang="text" class="" style="" inline="1">none</syntaxhighlight>. Force point marker to be displayed by setting to <syntaxhighlight lang="text" class="" style="" inline="1">on</syntaxhighlight>. Default: not specified
    • {{#if:||mapframe-}}line – Turn off display of line feature by setting to <syntaxhighlight lang="text" class="" style="" inline="1">none</syntaxhighlight>. Default: not specified
    • {{#if:||mapframe-}}geomask – Wikidata item to use as a geomask (everything outside the boundary is shaded darker). Can either be a specific Wikidata item (Q-number), or a property that specifies the item to use (e.g. P17 for {{#if:P17

| {{#switch:P 

 | Q | P = Lua error: Internal error: The interpreter exited with status 127. (P17)
 | #default = Lua error: Internal error: The interpreter exited with status 127. (QP17)
 }}

| {{#if:Lua error: Internal error: The interpreter exited with status 127. 

 | [[d:Special:EntityPage/Lua error: Internal error: The interpreter exited with status 127.|Lua error: Internal error: The interpreter exited with status 127. (Lua error: Internal error: The interpreter exited with status 127.)]]
 | (no entity)
 }}

}}, P131 for {{#if:P131 | {{#switch:P 

 | Q | P = Lua error: Internal error: The interpreter exited with status 127. (P131)
 | #default = Lua error: Internal error: The interpreter exited with status 127. (QP131)
 }}

| {{#if:Lua error: Internal error: The interpreter exited with status 127. 

 | [[d:Special:EntityPage/Lua error: Internal error: The interpreter exited with status 127.|Lua error: Internal error: The interpreter exited with status 127. (Lua error: Internal error: The interpreter exited with status 127.)]]
 | (no entity)
 }}

}}). Default: not specified

    • {{#if:||mapframe-}}switcher – set to <syntaxhighlight lang="text" class="" style="" inline="1">auto</syntaxhighlight> or <syntaxhighlight lang="text" class="" style="" inline="1">geomasks</syntaxhighlight> or <syntaxhighlight lang="text" class="" style="" inline="1">zooms</syntaxhighlight> to enable Template:Switcher-style switching between multiple mapframes. Default: not specified
      • <syntaxhighlight lang="text" class="" style="" inline="1">auto</syntaxhighlight> – switch geomasks found in {{#if:P276

| {{#switch:P 

 | Q | P = Lua error: Internal error: The interpreter exited with status 127. (P276)
 | #default = Lua error: Internal error: The interpreter exited with status 127. (QP276)
 }}

| {{#if:Lua error: Internal error: The interpreter exited with status 127. 

 | [[d:Special:EntityPage/Lua error: Internal error: The interpreter exited with status 127.|Lua error: Internal error: The interpreter exited with status 127. (Lua error: Internal error: The interpreter exited with status 127.)]]
 | (no entity)
 }}

}} and {{#if:P131 | {{#switch:P 

 | Q | P = Lua error: Internal error: The interpreter exited with status 127. (P131)
 | #default = Lua error: Internal error: The interpreter exited with status 127. (QP131)
 }}

| {{#if:Lua error: Internal error: The interpreter exited with status 127. 

 | [[d:Special:EntityPage/Lua error: Internal error: The interpreter exited with status 127.|Lua error: Internal error: The interpreter exited with status 127. (Lua error: Internal error: The interpreter exited with status 127.)]]
 | (no entity)
 }}

}} statements on the page's Wikidata item, searching recursively. E.g. an item's city, that city's state, and that state's country.

      • <syntaxhighlight lang="text" class="" style="" inline="1">geomasks</syntaxhighlight> – switch between the geomasks specified as a comma-separated list of Wikidata items (Q-numbers) in the {{#if:||mapframe-}}geomask parameter
      • <syntaxhighlight lang="text" class="" style="" inline="1">zooms</syntaxhighlight> – switch between "zoomed in"/"zoomed midway"/"zoomed out", where "zoomed in" is the default zoom (with a minimum of <syntaxhighlight lang="text" class="" style="" inline="1">3</syntaxhighlight>), "zoomed out" is <syntaxhighlight lang="text" class="" style="" inline="1">1</syntaxhighlight>, and "zoomed midway" is the average
  • Other optional parameters:
    • {{#if:||mapframe-}}frame-width or {{#if:||mapframe-}}width – Frame width. Default: 250
    • {{#if:||mapframe-}}frame-height or {{#if:||mapframe-}}height – Frame height. Default: 200
    • {{#if:||mapframe-}}shape-fill – Color used to fill shape features. Default: #606060
    • {{#if:||mapframe-}}shape-fill-opacity – Opacity level of shape fill, a number between 0 and 1. Default: 0.5
    • {{#if:||mapframe-}}stroke-color or {{#if:||mapframe-}}stroke-colour – Color of line features, and outlines of shape features. Default: #ff0000
    • {{#if:||mapframe-}}stroke-width – Width of line features, and outlines of shape features; default is "5". Default: 5
    • {{#if:||mapframe-}}marker – Marker symbol to use for coordinates; see mw:Help:Extension:Kartographer/Icons for options. Default: town
      • Can also be set to <syntaxhighlight lang="text" class="" style="" inline="1">blank</syntaxhighlight> to override any default marker symbol
    • {{#if:||mapframe-}}marker-color or {{#if:||mapframe-}}marker-colour – Background color for the marker. Default: #5E74F3
    • {{#if:||mapframe-}}geomask-stroke-color or {{#if:||mapframe-}}geomask-stroke-colour – Color of outline of geomask shape. Default: #555555
    • {{#if:||mapframe-}}geomask-stroke-width – Width of outline of geomask shape. Default: 2
    • {{#if:||mapframe-}}geomask-fill – Color used to fill outside geomask features. Default: #606060
    • {{#if:||mapframe-}}geomask-fill-opacity – Opacity level of fill outside geomask features, a number between 0 and 1. Default: 0.5
    • {{#if:||mapframe-}}zoom – Set the zoom level, from "1" (map of earth) to "18" (maximum zoom in), to be used if the zoom level cannot be determined automatically from object length or area. Default: 10
    • {{#if:||mapframe-}}length_km or {{#if:||mapframe-}}length_mi or {{#if:||mapframe-}}area_km2 or {{#if:||mapframe-}}area_mi2 – Determine zoom level by passing in object's length (in kilometres or miles) or area (in square kilometres or square miles). Default: not specified
    • {{#if:||mapframe-}}frame-coordinates or {{#if:||mapframe-}}frame-coord – Alternate latitude and longitude coordinates for initial placement of map, using {{coord}}. Default: derived from item coordinates
    • {{#if:||mapframe-}}type – Set the type of the object, with the same usage as {{coord}}. Default: city
    • {{#if:||mapframe-}}population – Set the population, useful with type="city", for {{Infobox dim}}. Default: |{{SAFESUBST:#if:population_metro|population_metro=}} or |{{SAFESUBST:#if:population_total|population_total=}}

{{#if:|

  • Deprecated parameters
    • Template:Gray – Alternate latitude coordinate for initial placement of map; default is derived from item coordinates
    • Template:Gray – Alternate longitude coordinate for initial placement of map; default is derived from item coordinates

}}

Examples

[edit source]
Example 1

{{#switch: 

 {{#if: 
 | {{{demospace}}}    
 | {{#ifeq:Template|
   | main
   | other
   }} 
 }}

| main = Script error: No such module "Settlement short description". | other | #default = }}Lua error: Internal error: The interpreter exited with status 127.{{#switch: 

 {{#if:
 | {{{demospace}}}    
 | {{#ifeq:Template|Template
   | template
   | other
   }}
 }}

| template = {{#ifeq:Infobox settlement/doc|Infobox||{{#ifeq:docdocd|Infobox|}}}} | other | #default = }}Lua error: Internal error: The interpreter exited with status 127.Lua error: Internal error: The interpreter exited with status 127.{{#if: 

|

}}{{#switch: 

 {{#if: 
 | {{{demospace}}}    
 | {{#ifeq:Template|
   | main
   | other
   }} 
 }}

| main = {{#if:United States||}}{{#if:USAUS-IL-Chicago.png||}}{{#if:|{{#if:US-IL-Chicago.png||}}}}{{#if:Lua error: Internal error: The interpreter exited with status 127.||}}{{#if:|{{#ifeq:City|City||}}|}}{{#if:|}}

| other | #default = }}

<syntaxhighlight lang="wikitext" style="overflow:auto; white-space: pre-wrap;"> {{#switch: 

 {{#if: 
 | {{{demospace}}}    
 | {{#ifeq:Template|
   | main
   | other
   }} 
 }}

| main = Script error: No such module "Settlement short description". | other | #default = }}Lua error: Internal error: The interpreter exited with status 127.{{#switch: 

 {{#if:
 | {{{demospace}}}    
 | {{#ifeq:Template|Template
   | template
   | other
   }}
 }}

| template = {{#ifeq:Infobox settlement/doc|Infobox||{{#ifeq:docdocd|Infobox|}}}} | other | #default = }}Lua error: Internal error: The interpreter exited with status 127.Lua error: Internal error: The interpreter exited with status 127.{{#if: 

|

}}{{#switch: 

 {{#if: 
 | {{{demospace}}}    
 | {{#ifeq:Template|
   | main
   | other
   }} 
 }}

| main = {{#if:United States||}}{{#if:USAUS-IL-Chicago.png||}}{{#if:|{{#if:US-IL-Chicago.png||}}}}{{#if:Lua error: Internal error: The interpreter exited with status 127.||}}{{#if:|{{#ifeq:City|City||}}|}}{{#if:|}}

| other | #default = }} </syntaxhighlight>

References

1 }}||{{#switch:|1=|2=reflist-columns-2|#default=reflist-columns-3}} }}}}" {{#if: 
   | {{#iferror: {{#ifexpr: 1 > 1 }} |style="column-width: {{{1}}};"}}
   | {{#if: |style="column-width: {{{colwidth}}};"}}
   }}>
<references group="" responsive="{{#if:|0|1}}"></references>

Lua error: Internal error: The interpreter exited with status 127.

Example 2

{{#switch: 

 {{#if: 
 | {{{demospace}}}    
 | {{#ifeq:Template|
   | main
   | other
   }} 
 }}

| main = Script error: No such module "Settlement short description". | other | #default = }}Lua error: Internal error: The interpreter exited with status 127.{{#switch: 

 {{#if:
 | {{{demospace}}}    
 | {{#ifeq:Template|Template
   | template
   | other
   }}
 }}

| template = {{#ifeq:Infobox settlement/doc|Infobox||{{#ifeq:docdocd|Infobox|}}}} | other | #default = }}Lua error: Internal error: The interpreter exited with status 127.Lua error: Internal error: The interpreter exited with status 127.{{#if: 

|

}}{{#switch: 

 {{#if: 
 | {{{demospace}}}    
 | {{#ifeq:Template|
   | main
   | other
   }} 
 }}

| main = {{#if:United States||}}{{#if:USAWayne County Michigan Incorporated and Unincorporated areas Detroit highlighted.svg||}}{{#if:|{{#if:Wayne County Michigan Incorporated and Unincorporated areas Detroit highlighted.svg||}}}}{{#if:Lua error: Internal error: The interpreter exited with status 127.||}}{{#if:|{{#ifeq:City|City||}}|}}{{#if:|}}

| other | #default = }}

<syntaxhighlight lang="wikitext" style="overflow:auto; white-space: pre-wrap;"> {{#switch: 

 {{#if: 
 | {{{demospace}}}    
 | {{#ifeq:Template|
   | main
   | other
   }} 
 }}

| main = Script error: No such module "Settlement short description". | other | #default = }}Lua error: Internal error: The interpreter exited with status 127.{{#switch: 

 {{#if:
 | {{{demospace}}}    
 | {{#ifeq:Template|Template
   | template
   | other
   }}
 }}

| template = {{#ifeq:Infobox settlement/doc|Infobox||{{#ifeq:docdocd|Infobox|}}}} | other | #default = }}Lua error: Internal error: The interpreter exited with status 127.Lua error: Internal error: The interpreter exited with status 127.{{#if: 

|

}}{{#switch: 

 {{#if: 
 | {{{demospace}}}    
 | {{#ifeq:Template|
   | main
   | other
   }} 
 }}

| main = {{#if:United States||}}{{#if:USAWayne County Michigan Incorporated and Unincorporated areas Detroit highlighted.svg||}}{{#if:|{{#if:Wayne County Michigan Incorporated and Unincorporated areas Detroit highlighted.svg||}}}}{{#if:Lua error: Internal error: The interpreter exited with status 127.||}}{{#if:|{{#ifeq:City|City||}}|}}{{#if:|}}

| other | #default = }} </syntaxhighlight>

Supporting templates

[edit source]

The following is a list of sub-templates used by Infobox settlement. See the current list of all sub-templates for documentation, sandboxes, testcases, etc.

  1. {{Infobox settlement/areadisp}}
  2. {{Infobox settlement/densdisp}}
  3. {{Infobox settlement/dunam}}
  4. {{Infobox settlement/dunam/mag}}
  5. {{Infobox settlement/impus}}
  6. {{Infobox settlement/impus/mag}}
  7. {{Infobox settlement/lengthdisp}}
  8. {{Infobox settlement/link}}
  9. {{Infobox settlement/metric}}
  10. {{Infobox settlement/metric/mag}}
  11. {{Infobox settlement/pref}}

Microformat

[edit source]

The HTML markup produced by this template includes an hCard microformat, which makes the place-name and location parsable by computers, either acting automatically to catalogue articles across Wikipedia, or via a browser tool operated by a person, to (for example) add the subject to an address book. Within the hCard is a Geo microformat, which additionally makes the coordinates (latitude & longitude) parsable, so that they can be, say, looked up on a map, or downloaded to a GPS unit. For more information about the use of microformats on Wikipedia, please see the microformat project.

Sub-templates

[edit source]

If the place or venue has "established", "founded", "opened" or similar dates, use {{start date}} for the earliest of those dates unless the date is before 1583 CE.

If it has a URL, use {{URL}}.

Please do not remove instances of these sub-templates.

Classes

[edit source]

hCard uses HTML classes including:

{{#if:
  • adr
  • agent
  • category
  • county-name
  • extended-address
  • fn
  • label
  • locality
  • nickname
  • note
  • org
  • region
  • street-address
  • uid
  • url
  • vcard

|

  • adr
  • agent
  • category
  • county-name
  • extended-address
  • fn
  • label
  • locality
  • nickname
  • note
  • org
  • region
  • street-address
  • uid
  • url
  • vcard

}}

Geo is produced by calling {{coord}}, and uses HTML classes:

{{#if:
  • geo
  • latitude
  • longitude

|

  • geo
  • latitude
  • longitude

}}

Please do not rename or remove these classes nor collapse nested elements which use them.

Precision

[edit source]

When giving coordinates, please use an appropriate level of precision. Do not use {{coord}}'s |{{SAFESUBST:#if:name|name=}} parameter.{{#ifeq:doc|doc | | }}

TemplateData

[edit source]
{{#if:|{{#switch: 
|=[https://bambots.brucemyers.com/TemplateParam.php?wiki=enwiki&template=%7B%7B%23if%3AInfobox+settlement%7CInfobox+settlement%7CInfobox+settlement%7D%7D {{#ifeq:{{safesubst:#switch: {{{lc}}}
|no
|n
|f
|false
|off
|0        = no
|         = no
|¬        = no
|yes
|y
|t
|true
|on
|1        = yes
|#default = no

}}|no|S|s}}ee a monthly parameter usage report] for {{#if:Infobox settlement|Template:Infobox settlement|this template}} in articles{{#ifeq:{{safesubst:#switch: y 

|no
|n
|f
|false
|off
|0        = no
|         = no
|¬        = no
|yes
|y
|t
|true
|on
|1        = yes
|#default = no

}}|yes| based on {{#if:Infobox settlement|its|this}} TemplateData}}. 

|None|none=[https://bambots.brucemyers.com/TemplateParam.php?wiki=enwiki&template=%7B%7B%23if%3AInfobox+settlement%7CInfobox+settlement%7CInfobox+settlement%7D%7D {{#ifeq:{{safesubst:#switch: {{{lc}}}
|no
|n
|f
|false
|off
|0        = no
|         = no
|¬        = no
|yes
|y
|t
|true
|on
|1        = yes
|#default = no

}}|no|P|p}}arameter usage report]{{#ifeq:{{safesubst:#switch: y 

|no
|n
|f
|false
|off
|0        = no
|         = no
|¬        = no
|yes
|y
|t
|true
|on
|1        = yes
|#default = no

}}|yes| based on {{#if:Infobox settlement|its|this}} TemplateData}} 

|for|For=[https://bambots.brucemyers.com/TemplateParam.php?wiki=enwiki&template=%7B%7B%23if%3AInfobox+settlement%7CInfobox+settlement%7CInfobox+settlement%7D%7D {{#ifeq:{{safesubst:#switch: {{{lc}}}
|no
|n
|f
|false
|off
|0        = no
|         = no
|¬        = no
|yes
|y
|t
|true
|on
|1        = yes
|#default = no

}}|no|P|p}}arameter usage report] for {{#if:Infobox settlement|Template:Infobox settlement|Template:Infobox settlement}}{{#ifeq:{{safesubst:#switch: y 

|no
|n
|f
|false
|off
|0        = no
|         = no
|¬        = no
|yes
|y
|t
|true
|on
|1        = yes
|#default = no

}}|yes| based on {{#if:Infobox settlement|its|this}} TemplateData}}. 

|#default=[1]{{#ifeq:{{safesubst:#switch: y
|no
|n
|f
|false
|off
|0        = no
|         = no
|¬        = no
|yes
|y
|t
|true
|on
|1        = yes
|#default = no

}}|yes| based on {{#if:Infobox settlement|its|this}} TemplateData}} }}|This is the {{#if:|TemplateData|TemplateData}} for this template used by TemplateWizard, VisualEditor and other tools. {{#switch: 

|=[https://bambots.brucemyers.com/TemplateParam.php?wiki=enwiki&template=%7B%7B%23if%3AInfobox+settlement%7CInfobox+settlement%7CInfobox+settlement%7D%7D {{#ifeq:{{safesubst:#switch: {{{lc}}}
|no
|n
|f
|false
|off
|0        = no
|         = no
|¬        = no
|yes
|y
|t
|true
|on
|1        = yes
|#default = no

}}|no|S|s}}ee a monthly parameter usage report] for {{#if:Infobox settlement|Template:Infobox settlement|this template}} in articles{{#ifeq:{{safesubst:#switch: y 

|no
|n
|f
|false
|off
|0        = no
|         = no
|¬        = no
|yes
|y
|t
|true
|on
|1        = yes
|#default = no

}}|yes| based on {{#if:Infobox settlement|its|this}} TemplateData}}. 

|None|none=[https://bambots.brucemyers.com/TemplateParam.php?wiki=enwiki&template=%7B%7B%23if%3AInfobox+settlement%7CInfobox+settlement%7CInfobox+settlement%7D%7D {{#ifeq:{{safesubst:#switch: {{{lc}}}
|no
|n
|f
|false
|off
|0        = no
|         = no
|¬        = no
|yes
|y
|t
|true
|on
|1        = yes
|#default = no

}}|no|P|p}}arameter usage report]{{#ifeq:{{safesubst:#switch: y 

|no
|n
|f
|false
|off
|0        = no
|         = no
|¬        = no
|yes
|y
|t
|true
|on
|1        = yes
|#default = no

}}|yes| based on {{#if:Infobox settlement|its|this}} TemplateData}} 

|for|For=[https://bambots.brucemyers.com/TemplateParam.php?wiki=enwiki&template=%7B%7B%23if%3AInfobox+settlement%7CInfobox+settlement%7CInfobox+settlement%7D%7D {{#ifeq:{{safesubst:#switch: {{{lc}}}
|no
|n
|f
|false
|off
|0        = no
|         = no
|¬        = no
|yes
|y
|t
|true
|on
|1        = yes
|#default = no

}}|no|P|p}}arameter usage report] for {{#if:Infobox settlement|Template:Infobox settlement|Template:Infobox settlement}}{{#ifeq:{{safesubst:#switch: y 

|no
|n
|f
|false
|off
|0        = no
|         = no
|¬        = no
|yes
|y
|t
|true
|on
|1        = yes
|#default = no

}}|yes| based on {{#if:Infobox settlement|its|this}} TemplateData}}. 

|#default=[2]{{#ifeq:{{safesubst:#switch: y
|no
|n
|f
|false
|off
|0        = no
|         = no
|¬        = no
|yes
|y
|t
|true
|on
|1        = yes
|#default = no

}}|yes| based on {{#if:Infobox settlement|its|this}} TemplateData}} }}}}

TemplateData for Infobox settlement

Lua error: Internal error: The interpreter exited with status 127.{{#switch: 

 {{#if:
 | {{{demospace}}}    
 | {{#ifeq:Template|Template
   | template
   | other
   }}
 }}

| template = {{#if:{{#ifeq:Lua error: Internal error: The interpreter exited with status 127.|sandbox|1}}{{#ifeq:doc|doc|1}}Lua error: Internal error: The interpreter exited with status 127.||

}} | other | #default = }} {{ safesubst:#if: |{{ safesubst:#ifeq:{{{demo}}} |no 

|
|

}} |{{ safesubst:#ifeq:Template|Template 

|
|

}}}}

class="{{#switch: 
 {{#if:
{{{demospace}}} main other 
   }} 
 }}
main = cot-header-mainspace other #default = cot-header-other

}}" style="{{safesubst:#if:|background:{{{bg}}}|{{ safesubst:#if:

no {{#switch: 
 {{#if:
{{{demospace}}} main other 
   }} 
 }}
main = background:#F0F2F5 other #default = background:#CCFFCC

}} }}

Template {{#switch: 
 {{#if:
{{{demospace}}} main other 
   }} 
 }}
main = background:#F0F2F5 other #default = background:#CCFFCC

}} }}}}}}; font-size:87%; padding:0.2em 0.3em; text-align:{{safesubst:#if:|left|{{safesubst:#if:|left|center}}}}; {{safesubst:#if:|color: {{{fc}}};|{{safesubst:#if:|color:#202122|{{ safesubst:#if:

no color:black;

}}

Template color:black; }}}}}}}}" |
TemplateData

{{safesubst:#if:

- The following is a closed discussion. Template:Strongbad }}

<templatedata> { "description": "Infobox for human settlements (cities, towns, villages, communities) as well as other administrative districts, counties, provinces, etc.", "format": "Template:\n\n", "params": { "name": { "label": "Common name", "description": "This is the usual name in English. If it's not specified, the infobox will use the 'official_name' as a title unless this too is missing, in which case the page name will be used.", "type": "string", "suggested": true }, "official_name": { "label": "Official name", "description": "The official name in English, if different from 'name'.", "type": "string", "suggested": true }, "native_name": { "label": "Native name", "description": "This will display under the name/official name.", "type": "string", "example": "Distrito Federal de México" }, "native_name_lang": { "label": "Native name language", "description": "Use ISO 639-1 code, e.g. 'fr' for French. If there is more than one native name in different languages, enter those names using Template:Lang instead.", "type": "string", "example": "zh" }, "other_name": { "label": "Other name", "description": "For places with other commonly used names like Bombay or Saigon.", "type": "string" }, "settlement_type": { "label": "Type of settlement", "description": "Any type can be entered, such as 'City', 'Town', 'Village', 'Hamlet', 'Municipality', 'Reservation', etc. If set, will be displayed under the names, provided either 'name' or 'official_name' is filled in. Might also be used as a label for total population/area (defaulting to 'City'), if needed to distinguish from 'Urban', 'Rural' or 'Metro' (if urban, rural or metro figures are not present, the label is 'Total' unless 'total_type' is set).", "type": "string", "aliases": [ "type" ] }, "translit_lang1": { "label": "Transliteration from language 1", "description": "Will place the entry before the word 'transliteration(s)'. Can be used to specify a particular language, like in Dêlêg, or one may just enter 'Other', like in Gaza's article.", "type": "string" }, "translit_lang1_type": { "label": "Transliteration type for language 1", "type": "line", "example": "Hanyu pinyin", "description": "The type of transliteration used for the first language." }, "translit_lang1_info": { "label": "Transliteration language 1 info", "description": "Parameters 'translit_lang2_info1' ... 'translit_lang2_info6' are also available, but not documented here.", "type": "string" }, "translit_lang2": { "label": "Transliteration language 2", "description": "Will place a second transliteration. See Dêlêg.", "type": "string" }, "image_skyline": { "label": "Image", "description": "Primary image representing the settlement. Commonly a photo of the settlement’s skyline.", "type": "wiki-file-name" }, "imagesize": { "label": "Image size", "description": "Can be used to tweak the size of 'image_skyline' up or down. This can be helpful if an editor wants to make the infobox wider. If used, 'px' must be specified; default size is 250px.", "type": "string" }, "image_alt": { "label": "Image alt text", "description": "Alt (hover) text for the image, used by visually impaired readers who cannot see the image.", "type": "string" }, "image_caption": { "label": "Image caption", "description": "Will place a caption under 'image_skyline' (if present).", "type": "content" }, "image_flag": { "label": "Flag image", "description": "Used for a flag.", "type": "wiki-file-name" }, "flag_size": { "label": "Flag size", "description": "Can be used to tweak the size of 'image_flag' up or down from 100px as desired. If used, 'px' must be specified; default size is 100px.", "type": "string" }, "flag_alt": { "label": "Flag alt text", "description": "Alt text for the flag.", "type": "string" }, "flag_border": { "label": "Flag border?", "description": "Set to 'no' to remove the border from the flag.", "type": "boolean", "example": "no" }, "flag_link": { "label": "Flag link", "type": "string", "description": "Link to the flag." }, "image_seal": { "label": "Official seal image", "description": "An image of an official seal, if the place has one.", "type": "wiki-file-name" }, "seal_size": { "label": "Seal size", "description": "If used, 'px' must be specified; default size is 100px.", "type": "string" }, "seal_alt": { "label": "Seal alt text", "description": "Alt (hover) text for the seal.", "type": "string" }, "seal_link": { "label": "Seal link", "type": "string", "description": "Link to the seal." }, "image_shield": { "label": "Coat of arms/shield image", "description": "Can be used for a place with a coat of arms.", "type": "wiki-file-name" }, "shield_size": { "label": "Shield size", "description": "If used, 'px' must be specified; default size is 100px.", "type": "string", "example": "200px" }, "shield_alt": { "label": "Shield alt text", "description": "Alternate text for the shield.", "type": "string" }, "shield_link": { "label": "Shield link", "description": "Can be used if a wiki article if known but is not automatically linked by the template. See Coquitlam, British Columbia's infobox for an example.", "type": "string" }, "image_blank_emblem": { "label": "Blank emblem image", "description": "Can be used if a place has an official logo, crest, emblem, etc.", "type": "wiki-file-name" }, "blank_emblem_type": { "label": "Blank emblem type", "description": "Caption beneath 'image_blank_emblem' to specify what type of emblem it is.", "type": "string", "example": "Logo" }, "blank_emblem_size": { "label": "Blank emblem size", "description": "If used, 'px' must be specified; default size is 100px.", "type": "string", "example": "200px" }, "blank_emblem_alt": { "label": "Blank emblem alt text", "description": "Alt text for blank emblem.", "type": "string" }, "blank_emblem_link": { "label": "Blank emblem link", "type": "string", "description": "A link to the emblem of custom type." }, "nickname": { "label": "Nickname", "description": "Well-known nickname(s).", "type": "string", "example": "Sin City" }, "motto": { "label": "Motto", "description": "Will place the motto under the nicknames.", "type": "string" }, "anthem": { "label": "Anthem", "description": "Will place the anthem (song) under the nicknames.", "type": "string", "example": "Hatikvah" }, "image_map": { "label": "Map image", "description": "A map of the region, or a map with the region highlighted within a parent region.", "type": "wiki-file-name" }, "mapsize": { "label": "Map size", "description": "If used, 'px' must be specified; default is 250px.", "type": "string" }, "map_alt": { "label": "Map alt text", "description": "Alternate (hover) text for the map.", "type": "string" }, "map_caption": { "label": "Map caption", "type": "content", "description": "Caption for the map displayed." }, "image_map1": { "label": "Map 2 image", "description": "A secondary map image. The field 'image_map' must be filled in first. For an example, see Bloomsburg, Pennsylvania.", "example": "File:Columbia County Pennsylvania Incorporated and Unincorporated areas Bloomsburg Highlighted.svg", "type": "wiki-file-name" }, "mapsize1": { "label": "Map 2 size", "description": "If used, 'px' must be specified; default is 250px.", "type": "string", "example": "300px" }, "map_alt1": { "label": "Map 2 alt text", "description": "Alt (hover) text for the second map.", "type": "string" }, "map_caption1": { "label": "Map 2 caption", "type": "content", "description": "Caption of the second map." }, "pushpin_map": { "label": "Pushpin map", "description": "The name of a location map (e.g. 'Indonesia' or 'Russia'). The coordinates information (from the coordinates parameter) positions a pushpin coordinate marker and label on the map automatically. For an example, see Padang, Indonesia.", "type": "string", "example": "Indonesia" }, "pushpin_mapsize": { "label": "Pushpin map size", "description": "Must be entered as only a number—do not use 'px'. The default value is 250.", "type": "number", "example": "200" }, "pushpin_map_alt": { "label": "Pushpin map alt text", "description": "Alt (hover) text for the pushpin map.", "type": "string" }, "pushpin_map_caption": { "label": "Pushpin map caption", "description": "Fill out if a different caption from 'map_caption' is desired.", "type": "string", "example": "Map showing Bloomsburg in Pennsylvania" }, "pushpin_label": { "label": "Pushpin label", "type": "line", "example": "Bloomsburg", "description": "Label of the pushpin." }, "pushpin_label_position": { "label": "Pushpin label position", "description": "The position of the label on the pushpin map relative to the pushpin coordinate marker. Valid options are 'left', 'right', 'top', 'bottom', and 'none'. If this field is not specified, the default value is 'right'.", "type": "string", "example": "left", "default": "right" }, "pushpin_outside": { "label": "Pushpin outside?", "type": "line" }, "pushpin_relief": { "label": "Pushpin relief", "description": "Set this to 'y' or any non-blank value to use an alternative relief map provided by the selected location map (if a relief map is available).", "type": "string", "example": "y" }, "pushpin_image": { "label": "Pushpin image", "type": "wiki-file-name", "description": "Image to use for the pushpin." }, "pushpin_overlay": { "label": "Pushpin overlay", "description": "Can be used to specify an image to be superimposed on the regular pushpin map.", "type": "wiki-file-name" }, "coordinates": { "label": "Coordinates", "description": "Latitude and longitude. Use Lua error: Internal error: The interpreter exited with status 127.. See the documentation for Lua error: Internal error: The interpreter exited with status 127. for more details on usage.", "type": "wiki-template-name", "example": "Lua error: Internal error: The interpreter exited with status 127." }, "coor_pinpoint": { "label": "Coordinate pinpoint", "description": "If needed, to specify more exactly where (or what) coordinates are given (e.g. 'Town Hall') or a specific place in a larger area (e.g. a city in a county). Example: Masovian Voivodeship.", "type": "string" }, "coordinates_footnotes": { "label": "Coordinates footnotes", "description": "Reference(s) for coordinates. Placed within <ref> </ref> tags, possibly using the citing format at Lua error: Internal error: The interpreter exited with status 127..", "type": "string" }, "subdivision_type": { "label": "Subdivision type 1", "description": "Almost always 'Country'.", "type": "string", "example": "Country" }, "subdivision_name": { "label": "Subdivision name 1", "description": "Depends on 'subdivision_type'. Use the name in text form, e.g., 'United States'. Per MOS:INFOBOXFLAG, flag icons or flag templates may be used in this field.", "type": "string" }, "subdivision_type1": { "label": "Subdivision type 2", "description": "Additional subdivisions; can be state/province, region, or county.", "type": "string" }, "subdivision_type2": { "label": "Subdivision type 3", "description": "Additional subdivisions; can be state/province, region, or county.", "type": "string" }, "subdivision_type3": { "label": "Subdivision type 4", "description": "Additional subdivisions; can be state/province, region, or county.", "type": "string" }, "subdivision_type4": { "label": "Subdivision type 5", "description": "Additional subdivisions; can be state/province, region, or county.", "type": "string" }, "subdivision_type5": { "label": "Subdivision type 6", "description": "Additional subdivisions; can be state/province, region, or county.", "type": "string" }, "subdivision_type6": { "label": "Subdivision type 7", "description": "Additional subdivisions; can be state/province, region, or county.", "type": "string" }, "subdivision_name1": { "label": "Subdivision name 2", "description": "Use the name in text form, e.g., 'Florida' or 'Florida'. Per MOS:INFOBOXFLAG, flag icons or flag templates should not be used in this field.", "type": "string", "example": "Connecticut" }, "subdivision_name2": { "label": "Subdivision name 3", "description": "Use the name in text form, e.g., 'Florida' or 'Florida'. Per MOS:INFOBOXFLAG, flag icons or flag templates should not be used in this field.", "type": "string", "example": "Florida" }, "subdivision_name3": { "label": "Subdivision name 4", "description": "Use the name in text form, e.g., 'Florida' or 'Florida'. Per MOS:INFOBOXFLAG, flag icons or flag templates should not be used in this field.", "type": "string", "example": "Utah" }, "subdivision_name4": { "label": "Subdivision name 5", "description": "Use the name in text form, e.g., 'Florida' or 'Florida'. Per MOS:INFOBOXFLAG, flag icons or flag templates should not be used in this field.", "type": "string", "example": "California" }, "subdivision_name5": { "label": "Subdivision name 6", "description": "Use the name in text form, e.g., 'Florida' or 'Florida'. Per MOS:INFOBOXFLAG, flag icons or flag templates should not be used in this field.", "type": "string", "example": "Vermont" }, "subdivision_name6": { "label": "Subdivision name 7", "description": "Use the name in text form, e.g., 'Florida' or 'Florida'. Per MOS:INFOBOXFLAG, flag icons or flag templates should not be used in this field.", "type": "string", "example": "Wyoming" }, "established_title": { "label": "First establishment event", "description": "Title of the first establishment event.", "type": "string", "example": "First settled" }, "established_date": { "label": "First establishment date", "type": "date", "description": "Date of the first establishment event." }, "established_title1": { "label": "Second establishment event", "description": "Title of the second establishment event.", "type": "string", "example": "Incorporated as a town" }, "established_date1": { "label": "Second establishment date", "type": "date", "description": "Date of the second establishment event." }, "established_title2": { "label": "Third establishment event", "description": "Title of the third establishment event.", "type": "string", "example": "Incorporated as a city" }, "established_date2": { "label": "Third establishment date", "type": "date", "description": "Date of the third establishment event." }, "established_title3": { "label": "Fourth establishment event", "type": "string", "description": "Title of the fourth establishment event.", "example": "Incorporated as a county" }, "established_date3": { "label": "Fourth establishment date", "type": "date", "description": "Date of the fourth establishment event." }, "extinct_title": { "label": "Extinction event title", "description": "For when a settlement ceases to exist.", "type": "string", "example": "Sack of Rome" }, "extinct_date": { "label": "Extinction date", "type": "string", "description": "Date the settlement ceased to exist." }, "founder": { "label": "Founder", "description": "Who the settlement was founded by.", "type": "string" }, "named_for": { "label": "Named for", "description": "The source of the name of the settlement (a person, a place, et cetera).", "type": "string", "example": "Ho Chi Minh" }, "seat_type": { "label": "Seat of government type", "description": "The label for the seat of government (defaults to 'Seat').", "type": "string", "default": "Seat" }, "seat": { "label": "Seat of government", "description": "The seat of government.", "type": "string", "example": "White House" }, "parts_type": { "label": "Type of smaller subdivisions", "description": "The label for the smaller subdivisions (defaults to 'Boroughs').", "type": "string", "default": "Boroughs" }, "parts_style": { "label": "Parts style", "description": "Set to 'list' to display as a collapsible list, 'coll' as a collapsed list, or 'para' to use paragraph style. Default is 'list' for up to 5 items, otherwise 'coll'.", "type": "string", "example": "list" }, "parts": { "label": "Smaller subdivisions", "description": "Text or header of the list of smaller subdivisions.", "type": "string" }, "p1": { "label": "Smaller subdivision 1", "description": "The smaller subdivisions to be listed. Parameters 'p1' to 'p50' can also be used.", "type": "string" }, "government_footnotes": { "label": "Government footnotes", "description": "Reference(s) for government. Placed within <ref> </ref> tags, possibly using the citing format at Lua error: Internal error: The interpreter exited with status 127..", "type": "content" }, "government_type": { "label": "Government type", "description": "The place's type of government.", "type": "string", "example": "Mayor–council government" }, "governing_body": { "label": "Governing body", "description": "Name of the place's governing body.", "type": "wiki-page-name", "example": "Legislative Council of Hong Kong" }, "leader_party": { "label": "Leader political party", "description": "Political party of the place's leader.", "type": "string" }, "leader_title": { "label": "Leader title", "description": "First title of the place's leader, e.g. 'Mayor'.", "type": "string", "example": "Governor" }, "leader_name": { "label": "Leader's name", "description": "Name of the place's leader.", "type": "string", "example": "Jay Inslee" }, "leader_title1": { "label": "Leader title 1", "description": "First title of the place's leader, e.g. 'Mayor'.", "type": "string", "example": "Mayor" }, "leader_name1": { "label": "Leader name 1", "description": "Additional names for leaders. Parameters 'leader_name1' .. 'leader_name4' are available. For long lists, use Lua error: Internal error: The interpreter exited with status 127..", "type": "string" }, "total_type": { "label": "Total type", "description": "Specifies what total area and population figure refer to, e.g. 'Greater London'. This overrides other labels for total population/area. To make the total area and population display on the same line as the words Area and Population, with no Total or similar label, set the value of this parameter to ' '.", "type": "string" }, "unit_pref": { "label": "Unit preference", "description": "To change the unit order to 'imperial (metric)', enter 'imperial'. The default display style is 'metric (imperial)'. However, the template will swap the order automatically if the 'subdivision_name' equals some variation of the US or the UK. For the Middle East, a unit preference of dunam can be entered (only affects total area). All values must be entered in a raw format (no commas, spaces, or unit symbols). The template will format them automatically.", "type": "string", "example": "imperial" }, "area_footnotes": { "label": "Area footnotes", "description": "Reference(s) for area. Placed within <ref> </ref> tags, possibly using the citing format at Lua error: Internal error: The interpreter exited with status 127..", "type": "string" }, "dunam_link": { "label": "Link dunams?", "description": "If dunams are used, the default is to link the word dunams in the total area section. This can be changed by setting 'dunam_link' to another measure (e.g. 'dunam_link=water'). Linking can also be turned off by setting the parameter to something else (e.g., 'dunam_link=none' or 'dunam_link=off').", "type": "boolean", "example": "none" }, "area_total_km2": { "label": "Total area (km2)", "description": "Total area in square kilometers (symbol: km²). Value must be entered in raw format (no commas or spaces). Auto-converted to display square miles if 'area_total_sq_mi' is empty.", "type": "number" }, "area_total_sq_mi": { "label": "Total area (sq. mi)", "description": "Total area in square miles (symbol: sq mi). Value must be entered in raw format (no commas or spaces). Auto-converted to display square kilometers if 'area_total_km2' is empty.", "type": "number" }, "area_total_ha": { "label": "Total area (hectares)", "description": "Total area in hectares (symbol: ha). Value must be entered in raw format (no commas or spaces). Auto-converted to display acres if 'area_total_acre' is empty.", "type": "number" }, "area_total_acre": { "label": "Total area (acres)", "description": "Total area in acres. Value must be entered in raw format (no commas or spaces). Auto-converted to display hectares if 'area_total_ha' is empty.", "type": "number" }, "area_total_dunam": { "label": "Total area (dunams)", "description": "Total area in dunams, which is wikilinked. Used in Middle Eastern places like Israel, Gaza, and the West Bank. Value must be entered in raw format (no commas or spaces). Auto-converted to display square kilometers or hectares and square miles or acres if 'area_total_km2', 'area_total_ha', 'area_total_sq_mi', and 'area_total_acre' are empty. Examples: Gaza and Ramallah.", "type": "number" }, "area_land_km2": { "label": "Land area (sq. km)", "description": "Land area in square kilometers (symbol: km²). Value must be entered in raw format (no commas or spaces). Auto-converted to display square miles if 'area_land_sq_mi' is empty.", "type": "number" }, "area_land_sq_mi": { "label": "Land area (sq. mi)", "description": "Land area in square miles (symbol: sq mi). Value must be entered in raw format (no commas or spaces). Auto-converted to display square kilometers if 'area_land_km2' is empty.", "type": "number" }, "area_land_ha": { "label": "Land area (hectares)", "description": "The place's land area in hectares.", "type": "number" }, "area_land_dunam": { "label": "Land area (dunams)", "description": "The place's land area in dunams.", "type": "number" }, "area_land_acre": { "label": "Land area (acres)", "description": "The place's land area in acres.", "type": "number" }, "area_water_km2": { "label": "Water area (sq. km)", "description": "Water area in square kilometers (symbol: km²). Value must be entered in raw format (no commas or spaces). Auto-converted to display square miles if 'area_water_sq_mi' is empty.", "type": "number" }, "area_water_sq_mi": { "label": "Water area (sq. mi)", "description": "Water area in square miles (symbol: sq mi). Value must be entered in raw format (no commas or spaces). Auto-converted to display square kilometers if 'area_water_km2' is empty.", "type": "number" }, "area_water_ha": { "label": "Water area (hectares)", "description": "The place's water area in hectares.", "type": "number" }, "area_water_dunam": { "label": "Water area (dunams)", "description": "The place's water area in dunams.", "type": "number" }, "area_water_acre": { "label": "Water area (acres)", "description": "The place's water area in acres.", "type": "number" }, "area_water_percent": { "label": "Percent water area", "description": "Percent of water without the %.", "type": "number", "example": "21" }, "area_urban_km2": { "label": "Urban area (sq. km)", "type": "number", "description": "Area of the place's urban area in square kilometers." }, "area_urban_sq_mi": { "label": "Urban area (sq. mi)", "type": "number", "description": "Area of the place's urban area in square miles." }, "area_urban_ha": { "label": "Urban area (hectares)", "description": "Area of the place's urban area in hectares.", "type": "number" }, "area_urban_dunam": { "label": "Urban area (dunams)", "description": "Area of the place's urban area in dunams.", "type": "number" }, "area_urban_acre": { "label": "Urban area (acres)", "description": "Area of the place's urban area in acres.", "type": "number" }, "area_urban_footnotes": { "label": "Urban area footnotes", "description": "Reference(s) for the urban area. Placed within <ref> </ref> tags, possibly using the citing format at Lua error: Internal error: The interpreter exited with status 127..", "type": "string" }, "area_rural_km2": { "label": "Rural area (sq. km)", "type": "number", "description": "Area of the place's rural area in square kilometers." }, "area_rural_sq_mi": { "label": "Rural area (sq. mi)", "type": "number", "description": "Area of the place's rural area in square miles." }, "area_rural_ha": { "label": "Rural area (hectares)", "description": "Area of the place's rural area in hectares.", "type": "number" }, "area_rural_dunam": { "label": "Rural area (dunams)", "description": "Area of the place's rural area in dunams.", "type": "number" }, "area_rural_acre": { "label": "Rural area (acres)", "description": "Area of the place's rural area in acres.", "type": "number" }, "area_rural_footnotes": { "label": "Rural area footnotes", "description": "Reference(s) for the urban area. Placed within <ref> </ref> tags, possibly using the citing format at Lua error: Internal error: The interpreter exited with status 127..", "type": "string" }, "area_metro_km2": { "label": "Metropolitan area (sq. km)", "type": "number", "description": "Area of the place's metropolitan area in square kilometers." }, "area_metro_sq_mi": { "label": "Metropolitan area (sq. mi)", "type": "number", "description": "Area of the place's metropolitan area in square miles." }, "area_metro_ha": { "label": "Metropolitan area (hectares)", "description": "Area of the place's metropolitan area in hectares.", "type": "number" }, "area_metro_dunam": { "label": "Metropolitan area (dunams)", "description": "Area of the place's metropolitan area in dunams.", "type": "number" }, "area_metro_acre": { "label": "Metropolitan area (acres)", "description": "Area of the place's metropolitan area in acres.", "type": "number" }, "area_metro_footnotes": { "label": "Metropolitan area footnotes", "description": "Reference(s) for the urban area. Placed within <ref> </ref> tags, possibly using the citing format at Lua error: Internal error: The interpreter exited with status 127..", "type": "string" }, "area_rank": { "label": "Area rank", "description": "The settlement's area, as ranked within its parent sub-division.", "type": "string" }, "area_blank1_title": { "label": "First blank area section title", "description": "Title of the place's first custom area section.", "type": "string", "example": "see London" }, "area_blank1_km2": { "label": "Area blank 1 (sq. km)", "type": "number", "description": "Area of the place's first blank area section in square kilometers." }, "area_blank1_sq_mi": { "label": "Area blank 1 (sq. mi)", "type": "number", "description": "Area of the place's first blank area section in square miles." }, "area_blank1_ha": { "label": "Area blank 1 (hectares)", "description": "Area of the place's first blank area section in hectares.", "type": "number" }, "area_blank1_dunam": { "label": "Area blank 1 (dunams)", "description": "Area of the place's first blank area section in dunams.", "type": "number" }, "area_blank1_acre": { "label": "Area blank 1 (acres)", "description": "Area of the place's first blank area section in acres.", "type": "number" }, "area_blank2_title": { "label": "Second blank area section title", "type": "string", "description": "Title of the place's second custom area section." }, "area_blank2_km2": { "label": "Area blank 2 (sq. km)", "type": "number", "description": "Area of the place's second blank area section in square kilometers." }, "area_blank2_sq_mi": { "label": "Area blank 2 (sq. mi)", "type": "number", "description": "Area of the place's second blank area section in square miles." }, "area_blank2_ha": { "label": "Area blank 2 (hectares)", "description": "Area of the place's third blank area section in hectares.", "type": "number" }, "area_blank2_dunam": { "label": "Area blank 2 (dunams)", "description": "Area of the place's third blank area section in dunams.", "type": "number" }, "area_blank2_acre": { "label": "Area blank 2 (acres)", "description": "Area of the place's third blank area section in acres.", "type": "number" }, "area_note": { "label": "Area footnotes", "description": "A place for additional information such as the name of the source.", "type": "content", "example": "<ref name=\"CenPopGazetteer2016\">Lua error: Internal error: The interpreter exited with status 127.</ref>" }, "dimensions_footnotes": { "label": "Dimensions footnotes", "description": "Reference(s) for dimensions. Placed within <ref> </ref> tags, possibly using the citing format at Lua error: Internal error: The interpreter exited with status 127..", "type": "content" }, "length_km": { "label": "Length in km", "description": "Raw number entered in kilometers. Will automatically convert to display length in miles if 'length_mi' is empty.", "type": "number" }, "length_mi": { "label": "Length in miles", "description": "Raw number entered in miles. Will automatically convert to display length in kilometers if 'length_km' is empty.", "type": "number" }, "width_km": { "label": "Width in kilometers", "description": "Raw number entered in kilometers. Will automatically convert to display width in miles if 'length_mi' is empty.", "type": "number" }, "width_mi": { "label": "Width in miles", "description": "Raw number entered in miles. Will automatically convert to display width in kilometers if 'length_km' is empty.", "type": "number" }, "elevation_m": { "label": "Elevation in meters", "description": "Raw number entered in meters. Will automatically convert to display elevation in feet if 'elevation_ft' is empty. However, if a range in elevation (i.e. 5–50 m) is desired, use the 'max' and 'min' fields below.", "type": "number" }, "elevation_ft": { "label": "Elevation in feet", "description": "Raw number, entered in feet. Will automatically convert to display the average elevation in meters if 'elevation_m' field is empty. However, if a range in elevation (i.e. 50–500 ft) is desired, use the 'max' and 'min' fields below.", "type": "number" }, "elevation_footnotes": { "label": "Elevation footnotes", "description": "Reference(s) for elevation. Placed within <ref> </ref> tags, possibly using the citing format at Lua error: Internal error: The interpreter exited with status 127..", "type": "string" }, "elevation_min_point": { "type": "line", "label": "Point of min elevation", "description": "The name of the point of lowest elevation in the place.", "example": "Death Valley" }, "elevation_min_m": { "label": "Minimum elevation (m)", "type": "number", "description": "The minimum elevation in meters." }, "elevation_min_ft": { "label": "Minimum elevation (ft)", "type": "number", "description": "The minimum elevation in feet." }, "elevation_min_rank": { "type": "line", "label": "Minimum elevation rank", "description": "The point of minimum elevation's rank in the parent region.", "example": "1st" }, "elevation_min_footnotes": { "label": "Min elevation footnotes", "type": "content", "description": "Footnotes or citations for the minimum elevation." }, "elevation_max_point": { "type": "line", "label": "Point of max elevation", "description": "The name of the point of highest elevation in the place.", "example": "Mount Everest" }, "elevation_max_m": { "label": "Maximum elevation (m)", "type": "number", "description": "The maximum elevation in meters." }, "elevation_max_ft": { "label": "Maximum elevation (ft)", "type": "number", "description": "The maximum elevation in feet." }, "elevation_max_rank": { "type": "line", "label": "Maximum elevation rank", "description": "The point of maximum elevation's rank in the parent region.", "example": "2nd" }, "elevation_max_footnotes": { "label": "Max elevation footnotes", "type": "content", "description": "Footnotes or citations for the maximum elevation." }, "population_total": { "label": "Population total", "description": "Actual population (see below for estimates) preferably consisting of digits only (without any commas).", "type": "number" }, "population_as_of": { "label": "Population total figure's year", "description": "The year for the population total (usually a census year).", "type": "number" }, "population_footnotes": { "label": "Population footnotes", "description": "Reference(s) for population; placed within <ref> </ref> tags.", "type": "content" }, "population_density_km2": { "label": "Population density (per square km)", "type": "string", "description": "The place's population density per square kilometer.", "example": "auto" }, "population_density_sq_mi": { "label": "Population density (per square mi)", "type": "string", "description": "The place's population density per square mile.", "example": "auto" }, "population_est": { "label": "Population estimate", "description": "Population estimate, e.g. for growth projections 4 years after a census.", "type": "number", "example": "331000000" }, "pop_est_as_of": { "label": "Population estimate figure as of", "description": "The year, or the month and year, of the population estimate.", "type": "date" }, "pop_est_footnotes": { "label": "Population estimate footnotes", "description": "Reference(s) for population estimate; placed within <ref> </ref> tags.", "type": "content", "example": "<ref name=\"USCensusEst2016\"/>" }, "population_urban": { "label": "Urban population", "type": "number", "description": "The place's urban population." }, "population_urban_footnotes": { "label": "Urban population footnotes", "description": "Reference(s) for urban population; placed within <ref> </ref> tags.", "type": "content" }, "population_density_urban_km2": { "label": "Urban population density (per square km)", "type": "string", "description": "The place's urban population density per square kilometer.", "example": "auto" }, "population_density_urban_sq_mi": { "label": "Urban population density (per square mi)", "type": "string", "description": "The place's urban population density per square mile.", "example": "auto" }, "population_rural": { "label": "Rural population", "type": "number", "description": "The place's rural population." }, "population_rural_footnotes": { "label": "Rural population footnotes", "description": "Reference(s) for rural population; placed within <ref> </ref> tags.", "type": "content" }, "population_density_rural_km2": { "label": "Rural population density per sq. km", "type": "line", "description": "The place's rural population density per square kilometer.", "example": "auto" }, "population_density_rural_sq_mi": { "label": "Rural population density per sq. mi", "type": "line", "description": "The place's rural population density per square mile.", "example": "auto" }, "population_metro": { "label": "Metropolitan area population", "type": "number", "description": "Population of the place's metropolitan area." }, "population_metro_footnotes": { "label": "Metropolitan area population footnotes", "description": "Reference(s) for metro population; placed within <ref> </ref> tags.", "type": "string" }, "population_density_metro_km2": { "label": "Metropolitan population density per sq. km", "type": "number", "description": "The place's metropolitan area's population density per square kilometer.", "example": "auto" }, "population_density_metro_sq_mi": { "label": "Metropolitan population density per sq. mi", "type": "number", "description": "The place's metropolitan area's population density per square mile.", "example": "auto" }, "population_rank": { "label": "Population rank", "description": "The settlement's population, as ranked within its parent sub-division.", "type": "string" }, "population_density_rank": { "label": "Population density rank", "description": "The settlement's population density, as ranked within its parent sub-division.", "type": "string" }, "population_blank1_title": { "label": "Custom population type 1 title", "description": "Can be used for estimates. For an example, see Windsor, Ontario.", "type": "string", "example": "See: Windsor, Ontario" }, "population_blank1": { "label": "Custom population type 1", "description": "The population value for 'blank1_title'.", "type": "string" }, "population_density_blank1_km2": { "label": "Custom population type 1 density per sq. km", "type": "string", "description": "Population density per square kilometer, according to the 1st custom population type." }, "population_density_blank1_sq_mi": { "label": "Custom population type 1 density per sq. mi", "type": "string", "description": "Population density per square mile, according to the 1st custom population type." }, "population_blank2_title": { "label": "Custom population type 2 title", "description": "Can be used for estimates. For an example, see Windsor, Ontario.", "type": "string", "example": "See: Windsor, Ontario" }, "population_blank2": { "label": "Custom population type 2", "description": "The population value for 'blank2_title'.", "type": "string" }, "population_density_blank2_km2": { "label": "Custom population type 2 density per sq. km", "type": "string", "description": "Population density per square kilometer, according to the 2nd custom population type." }, "population_density_blank2_sq_mi": { "label": "Custom population type 2 density per sq. mi", "type": "string", "description": "Population density per square mile, according to the 2nd custom population type." }, "population_demonym": { "label": "Demonym", "description": "A demonym or gentilic is a word that denotes the members of a people or the inhabitants of a place. For example, a citizen in Liverpool is known as a Liverpudlian.", "type": "line", "example": "Liverpudlian" }, "population_note": { "label": "Population note", "description": "A place for additional information such as the name of the source. See Windsor, Ontario, for an example.", "type": "content" }, "demographics_type1": { "label": "Demographics type 1", "description": "A sub-section header.", "type": "string", "example": "Ethnicities" }, "demographics1_footnotes": { "label": "Demographics section 1 footnotes", "description": "Reference(s) for demographics section 1. Placed within <ref> </ref> tags, possibly using the citing format at Lua error: Internal error: The interpreter exited with status 127..", "type": "content" }, "demographics1_title1": { "label": "Demographics section 1 title 1", "description": "Titles related to demographics_type1. For example: 'White', 'Black', 'Hispanic'... Additional rows 'demographics1_title1' to 'demographics1_title5' are also available.", "type": "string" }, "demographics_type2": { "label": "Demographics type 2", "description": "A second sub-section header.", "type": "line", "example": "Languages" }, "demographics2_footnotes": { "label": "Demographics section 2 footnotes", "description": "Reference(s) for demographics section 2. Placed within <ref> </ref> tags, possibly using the citing format at Lua error: Internal error: The interpreter exited with status 127..", "type": "string" }, "demographics2_title1": { "label": "Demographics section 2 title 1", "description": "Titles related to 'demographics_type1'. For example: 'English', 'French', 'Arabic'... Additional rows 'demographics2_title2' to 'demographics1_title5' are also available.", "type": "string" }, "demographics2_info1": { "label": "Demographics section 2 info 1", "description": "Information related to the titles. For example: '50%', '25%', '10%'... Additional rows 'demographics2_info2' to 'demographics2_info5' are also available.", "type": "content" }, "timezone1": { "label": "Timezone 1", "type": "string", "description": "The place's primary time-zone.", "example": "Eastern Standard Time", "aliases": [ "timezone" ] }, "utc_offset": { "label": "UTC offset", "type": "string", "description": "The place's time-zone's offset from UTC.", "example": "+8" }, "timezone_DST": { "label": "Timezone during DST", "type": "string", "description": "The place's time-zone during daylight savings time, if applicable.", "example": "Eastern Daylight Time" }, "utc_offset_DST": { "label": "UTC offset during DST", "type": "string", "description": "The place's time-zone's UTC offset during daylight savings time, if applicable.", "example": "+9" }, "utc_offset1": { "label": "UTC offset 1", "type": "string", "description": "The place's primary time-zone's offset from UTC.", "example": "-5" }, "timezone1_DST": { "label": "Timezone 1 (during DST)", "type": "string", "description": "The place's primary time-zone during daylight savings time, if applicable.", "example": "Eastern Daylight Time" }, "utc_offset1_DST": { "label": "UTC offset 1 (during DST)", "type": "string", "description": "The place's primary time-zone's UTC offset during daylight savings time, if applicable.", "example": "-6" }, "timezone2": { "label": "Timezone 2", "description": "A second timezone field for larger areas such as a province.", "type": "string", "example": "Central Standard Time" }, "utc_offset2": { "label": "UTC offset 2", "type": "string", "description": "The place's secondary time-zone's offset from UTC.", "example": "-6" }, "timezone2_DST": { "label": "Timezone 2 during DST", "type": "string", "description": "The place's secondary time-zone during daylight savings time, if applicable.", "example": "Central Daylight Time" }, "utc_offset2_DST": { "label": "UTC offset 2 during DST", "type": "string", "description": "The place's secondary time-zone's offset from UTC during daylight savings time, if applicable.", "example": "-7" }, "postal_code_type": { "label": "Postal code type", "description": "Label used for postal code info, e.g. 'ZIP Code'. Defaults to 'Postal code'.", "example": "Postal code", "type": "string" }, "postal_code": { "label": "Postal code", "description": "The place's postal code/zip code.", "type": "string", "example": "90210" }, "postal2_code_type": { "label": "Postal code 2 type", "type": "string", "description": "If applicable, the place's second postal code type." }, "postal2_code": { "label": "Postal code 2", "type": "string", "description": "A second postal code of the place, if applicable.", "example": "90007" }, "area_code": { "label": "Area code", "description": "The regions' telephone area code.", "type": "string" }, "area_code_type": { "label": "Area code type", "description": "If left blank/not used, template will default to 'Area code(s)'.", "type": "string" }, "geocode": { "label": "Geocode", "description": "See Geocode.", "type": "string" }, "iso_code": { "label": "ISO 3166 code", "description": "See ISO 3166.", "type": "string" }, "registration_plate": { "label": "Registration/license plate info", "description": "See Vehicle registration plate.", "type": "string" }, "blank_name_sec1": { "label": "Blank name section 1", "description": "Fields used to display other information. The name is displayed in bold on the left side of the infobox.", "type": "string", "aliases": [ "blank_name" ] }, "blank_info_sec1": { "label": "Blank info section 1", "description": "The information associated with the 'blank_name_sec1' heading. The info is displayed on the right side of the infobox in the same row as the name. For an example, see Warsaw.", "type": "content", "aliases": [ "blank_info" ] }, "blank1_name_sec1": { "label": "Blank 1 name section 1", "description": "Up to 7 additional fields 'blank1_name_sec1' ... 'blank7_name_sec1' can be specified.", "type": "string" }, "blank1_info_sec1": { "label": "Blank 1 info section 1", "description": "Up to 7 additional fields 'blank1_info_sec1' ... 'blank7_info_sec1' can be specified.", "type": "content" }, "blank_name_sec2": { "label": "Blank name section 2", "description": "For a second section of blank fields.", "type": "string" }, "blank_info_sec2": { "label": "Blank info section 2", "example": "Beijing", "type": "content", "description": "The information associated with the 'blank_name_sec2' heading. The info is displayed on right side of infobox, in the same row as the name. For an example, see Warsaw." }, "blank1_name_sec2": { "label": "Blank 1 name section 2", "description": "Up to 7 additional fields 'blank1_name_sec2' ... 'blank7_name_sec2' can be specified.", "type": "string" }, "blank1_info_sec2": { "label": "Blank 1 info section 2", "description": "Up to 7 additional fields 'blank1_info_sec2' ... 'blank7_info_sec2' can be specified.", "type": "content" }, "website": { "label": "Official website in English", "description": "External link to official website. Use the Lua error: Internal error: The interpreter exited with status 127.Lua error: Internal error: The interpreter exited with status 127. template, thus: Lua error: Internal error: The interpreter exited with status 127.Lua error: Internal error: The interpreter exited with status 127..", "type": "string" }, "footnotes": { "label": "Footnotes", "description": "Text to be displayed at the bottom of the infobox.", "type": "content" }, "translit_lang1_info1": { "label": "Language 1 first transcription ", "description": "Transcription of type 1 in the first other language.", "example": "Lua error: Internal error: The interpreter exited with status 127.", "type": "line" }, "translit_lang1_type1": { "label": "Language 1 first transcription type", "description": "Type of transcription used in the first language's first transcription.", "example": "Chinese", "type": "line" }, "translit_lang1_info2": { "label": "Language 1 second transcription ", "description": "Transcription of type 1 in the first other language.", "example": "Lua error: Internal error: The interpreter exited with status 127.", "type": "line" }, "translit_lang1_type2": { "label": "Language 1 second transcription type", "description": "Type of transcription used in the first language's first transcription.", "example": "Tamil", "type": "line" }, "demographics1_info1": { "label": "Demographics section 1 info 1", "description": "Information related to the titles. For example: '50%', '25%', '10%'... Additional rows 'demographics1_info1' to 'demographics1_info5' are also available.", "type": "content" }, "mapframe": { "label": "Show mapframe map", "description": "Specify yes or no to show or hide the map, overriding the default", "example": "yes", "type": "string", "default": "no", "suggested": true }, "mapframe-caption": { "label": "Mapframe caption", "description": "Caption for the map. If mapframe-geomask is set, then the default is \"Location in <<geomask's label>>\"", "type": "string" }, "mapframe-custom": { "label": "Custom mapframe", "description": "Use a custom map instead of the automatic mapframe. Specify either a Template:Maplink template, or another template that generates a mapframe map, or an image name. If used, other mapframe parameters will be ignored.", "type": "wiki-template-name" }, "mapframe-id": { "aliases": [ "id", "qid" ], "label": "Mapframe Wikidata item", "description": "Id (Q-number) of Wikidata item to use.", "type": "string", "default": "(item for current page)" }, "mapframe-coordinates": { "aliases": [ "mapframe-coord", "coordinates", "coord" ], "label": "Mapframe coordinates ", "description": "Coordinates to use, instead of any on Wikidata. Use the Lua error: Internal error: The interpreter exited with status 127. template.", "example": "Lua error: Internal error: The interpreter exited with status 127.", "type": "wiki-template-name", "default": "(coordinates from Wikidata)" }, "mapframe-wikidata": { "label": "Mapframe shapes from Wikidata", "description": "et to yes to show shape/line features from the wikidata item, if any, when coordinates are specified by parameter", "example": "yes", "type": "string" }, "mapframe-shape": { "label": "Mapframe shape feature", "description": "Override display of mapframe shape feature. Turn off by setting to \"none\". Use an inverse shape (geomask) instead of a regular shape by setting to \"inverse\"", "type": "string" }, "mapframe-point": { "label": "Mapframe point feature", "description": "Override display of mapframe point feature. Turn off display of point feature by setting to \"none\". Force point marker to be displayed by setting to \"on\"", "type": "string" }, "mapframe-geomask": { "label": "Mapframe geomask", "description": "Wikidata item to use as a geomask (everything outside the boundary is shaded darker). Can either be a specific Wikidata item (Q-number), or a property that specifies the item to use (e.g. P17 for country, or P131 for located in the administrative territorial entity)", "example": "Q100", "type": "wiki-page-name" }, "mapframe-switcher": { "label": "Mapframe switcher", "description": "Set to \"auto\" or \"geomasks\" or \"zooms\" to enable Template:Switcher-style switching between multiple mapframes. IF SET TO auto – switch geomasks found in location (P276) and located in the administrative territorial entity (P131) statements on the page's Wikidata item, searching recursively. E.g. an item's city, that city's state, and that state's country. IF SET TO geomasks – switch between the geomasks specified as a comma-separated list of Wikidata items (Q-numbers) in the mapframe-geomask parameter. IF SET TO zooms – switch between \"zoomed in\"/\"zoomed midway\"/\"zoomed out\", where \"zoomed in\" is the default zoom (with a minimum of 3), \"zoomed out\" is 1, and \"zoomed midway\" is the average.", "type": "string" }, "mapframe-frame-width": { "aliases": [ "mapframe-width" ], "label": "Mapframe width", "description": "Frame width in pixels", "type": "number", "default": "270" }, "mapframe-frame-height": { "aliases": [ "mapframe-height" ], "label": "Mapframe height", "description": "Frame height in pixels", "type": "number", "default": "200" }, "mapframe-shape-fill": { "label": "Mapframe shape fill", "description": "Color used to fill shape features", "type": "string", "default": "#606060" }, "mapframe-shape-fill-opacity": { "label": "Mapframe shape fill opacity", "description": "Opacity level of shape fill, a number between 0 and 1", "type": "number", "default": "0.5" }, "mapframe-stroke-color": { "aliases": [ "mapframe-stroke-colour" ], "label": "Mapframe stroke color", "description": "Color of line features, and outlines of shape features", "type": "string", "default": "#ff0000" }, "mapframe-stroke-width": { "label": "Mapframe stroke width", "description": "Width of line features, and outlines of shape features", "type": "number", "default": "5" }, "mapframe-marker": { "label": "Mapframe marker", "description": "Marker symbol to use for coordinates; see mw:Help:Extension:Kartographer/Icons for options", "example": "museum", "type": "string" }, "mapframe-marker-color": { "aliases": [ "mapframe-marker-colour" ], "label": "Mapframe marker color", "description": "Background color for the marker", "type": "string", "default": "#5E74F3" }, "mapframe-geomask-stroke-color": { "aliases": [ "mapframe-geomask-stroke-colour" ], "label": "Mapframe geomask stroke color", "description": "Color of outline of geomask shape", "type": "string", "default": "#555555" }, "mapframe-geomask-stroke-width": { "label": "Mapframe geomask stroke width", "description": "Width of outline of geomask shape", "type": "number", "default": "2" }, "mapframe-geomask-fill": { "label": "Mapframe geomask fill", "description": "Color used to fill outside geomask features", "type": "string", "default": "#606060" }, "mapframe-geomask-fill-opacity": { "label": "Mapframe geomask fill opacity", "description": "Opacity level of fill outside geomask features, a number between 0 and 1", "type": "number", "default": "0.5" }, "mapframe-zoom": { "label": "Mapframe zoom", "description": "Set the zoom level, from \"1\" to \"18\", to used if the zoom level cannot be determined automatically from object length or area", "example": "12", "type": "number", "default": "10" }, "mapframe-length_km": { "label": "Mapframe length (km)", "description": "Object length in kilometres, for automatically determining zoom level. ONLY use ONE of the available parameters for length or area", "type": "number" }, "mapframe-length_mi": { "label": "Mapframe length (mi)", "description": "Object length in miles, for automatically determining zoom level. ONLY use ONE of the available parameters for length or area", "type": "number" }, "mapframe-area_km2": { "label": "Mapframe area (km^2)", "description": "Object arean square kilometres, for automatically determining zoom level. ONLY use ONE of the available parameters for length or area", "type": "number" }, "mapframe-area_mi2": { "label": "Mapframe area (mi^2)", "description": "Object area in square miles, for automatically determining zoom level. ONLY use ONE of the available parameters for length or area", "type": "number" }, "mapframe-frame-coordinates": { "aliases": [ "mapframe-frame-coord" ], "label": "Mapframe frame coordinates", "description": "Alternate latitude and longitude coordinates for initial placement of map, using Lua error: Internal error: The interpreter exited with status 127.", "example": "Lua error: Internal error: The interpreter exited with status 127.", "type": "wiki-template-name" }, "mapframe-line": {} }, "paramOrder": [ "name", "official_name", "native_name", "native_name_lang", "other_name", "settlement_type", "translit_lang1", "translit_lang1_type", "translit_lang1_info", "translit_lang2", "image_skyline", "imagesize", "image_alt", "image_caption", "image_flag", "flag_size", "flag_alt", "flag_border", "flag_link", "image_seal", "seal_size", "seal_alt", "seal_link", "image_shield", "shield_size", "shield_alt", "shield_link", "image_blank_emblem", "blank_emblem_type", "blank_emblem_size", "blank_emblem_alt", "blank_emblem_link", "nickname", "motto", "anthem", "image_map", "mapsize", "map_alt", "map_caption", "image_map1", "mapsize1", "map_alt1", "map_caption1", "pushpin_map", "pushpin_mapsize", "pushpin_map_alt", "pushpin_map_caption", "pushpin_label", "pushpin_label_position", "pushpin_outside", "pushpin_relief", "pushpin_image", "pushpin_overlay", "mapframe", "mapframe-caption", "mapframe-custom", "mapframe-id", "mapframe-coordinates", "mapframe-wikidata", "mapframe-point", "mapframe-shape", "mapframe-frame-width", "mapframe-frame-height", "mapframe-shape-fill", "mapframe-shape-fill-opacity", "mapframe-stroke-color", "mapframe-stroke-width", "mapframe-marker", "mapframe-marker-color", "mapframe-geomask", "mapframe-geomask-stroke-color", "mapframe-geomask-stroke-width", "mapframe-geomask-fill", "mapframe-geomask-fill-opacity", "mapframe-zoom", "mapframe-length_km", "mapframe-length_mi", "mapframe-area_km2", "mapframe-area_mi2", "mapframe-frame-coordinates", "mapframe-switcher", 

       "mapframe-line",

"coordinates", "coor_pinpoint", "coordinates_footnotes", "subdivision_type", "subdivision_name", "subdivision_type1", "subdivision_name1", "subdivision_type2", "subdivision_name2", "subdivision_type3", "subdivision_name3", "subdivision_type4", "subdivision_name4", "subdivision_type5", "subdivision_name5", "subdivision_type6", "subdivision_name6", "established_title", "established_date", "established_title1", "established_date1", "established_title2", "established_date2", "established_title3", "established_date3", "extinct_title", "extinct_date", "founder", "named_for", "seat_type", "seat", "parts_type", "parts_style", "parts", "p1", "government_footnotes", "government_type", "governing_body", "leader_party", "leader_title", "leader_name", "leader_title1", "leader_name1", "total_type", "unit_pref", "area_footnotes", "dunam_link", "area_total_km2", "area_total_sq_mi", "area_total_ha", "area_total_acre", "area_total_dunam", "area_land_km2", "area_land_sq_mi", "area_land_ha", "area_land_dunam", "area_land_acre", "area_water_km2", "area_water_sq_mi", "area_water_ha", "area_water_dunam", "area_water_acre", "area_water_percent", "area_urban_km2", "area_urban_sq_mi", "area_urban_ha", "area_urban_dunam", "area_urban_acre", "area_urban_footnotes", "area_rural_km2", "area_rural_sq_mi", "area_rural_ha", "area_rural_dunam", "area_rural_acre", "area_rural_footnotes", "area_metro_km2", "area_metro_sq_mi", "area_metro_ha", "area_metro_dunam", "area_metro_acre", "area_metro_footnotes", "area_rank", "area_blank1_title", "area_blank1_km2", "area_blank1_sq_mi", "area_blank1_ha", "area_blank1_dunam", "area_blank1_acre", "area_blank2_title", "area_blank2_km2", "area_blank2_sq_mi", "area_blank2_ha", "area_blank2_dunam", "area_blank2_acre", "area_note", "dimensions_footnotes", "length_km", "length_mi", "width_km", "width_mi", "elevation_m", "elevation_ft", "elevation_footnotes", "elevation_min_point", "elevation_min_m", "elevation_min_ft", "elevation_min_rank", "elevation_min_footnotes", "elevation_max_point", "elevation_max_m", "elevation_max_ft", "elevation_max_rank", "elevation_max_footnotes", "population_total", "population_as_of", "population_footnotes", "population_density_km2", "population_density_sq_mi", "population_est", "pop_est_as_of", "pop_est_footnotes", "population_urban", "population_urban_footnotes", "population_density_urban_km2", "population_density_urban_sq_mi", "population_rural", "population_rural_footnotes", "population_density_rural_km2", "population_density_rural_sq_mi", "population_metro", "population_metro_footnotes", "population_density_metro_km2", "population_density_metro_sq_mi", "population_rank", "population_density_rank", "population_blank1_title", "population_blank1", "population_density_blank1_km2", "population_density_blank1_sq_mi", "population_blank2_title", "population_blank2", "population_density_blank2_km2", "population_density_blank2_sq_mi", "population_demonym", "population_note", "demographics_type1", "demographics1_footnotes", "demographics1_title1", "demographics_type2", "demographics2_footnotes", "demographics2_title1", "demographics2_info1", "timezone1", "utc_offset", "timezone_DST", "utc_offset_DST", "utc_offset1", "timezone1_DST", "utc_offset1_DST", "timezone2", "utc_offset2", "timezone2_DST", "utc_offset2_DST", "postal_code_type", "postal_code", "postal2_code_type", "postal2_code", "area_code", "area_code_type", "geocode", "iso_code", "registration_plate", "blank_name_sec1", "blank_info_sec1", "blank1_name_sec1", "blank1_info_sec1", "blank_name_sec2", "blank_info_sec2", "blank1_name_sec2", "blank1_info_sec2", "website", "footnotes", "translit_lang1_info1", "translit_lang1_type1", "translit_lang1_info2", "translit_lang1_type2", "demographics1_info1" ] } </templatedata>

Calls and redirects

[edit source]

At least 0 other templates call this one.

Several templates redirect here.

Tracking categories

[edit source]
  1. [[:Category:Lua error: Internal error: The interpreter exited with status 127.|{{#if:|{{{name}}}|Category:Lua error: Internal error: The interpreter exited with status 127.}}]] (0)
  2. [[:Category:Lua error: Internal error: The interpreter exited with status 127.|{{#if:|{{{name}}}|Category:Lua error: Internal error: The interpreter exited with status 127.}}]] (0)
  3. [[:Category:Lua error: Internal error: The interpreter exited with status 127.|{{#if:|{{{name}}}|Category:Lua error: Internal error: The interpreter exited with status 127.}}]] (0)
  4. [[:Category:Lua error: Internal error: The interpreter exited with status 127.|{{#if:|{{{name}}}|Category:Lua error: Internal error: The interpreter exited with status 127.}}]] (0)
  5. [[:Category:Lua error: Internal error: The interpreter exited with status 127.|{{#if:|{{{name}}}|Category:Lua error: Internal error: The interpreter exited with status 127.}}]] (0)
  6. [[:Category:Lua error: Internal error: The interpreter exited with status 127.|{{#if:|{{{name}}}|Category:Lua error: Internal error: The interpreter exited with status 127.}}]] (0)
  7. [[:Category:Lua error: Internal error: The interpreter exited with status 127.|{{#if:|{{{name}}}|Category:Lua error: Internal error: The interpreter exited with status 127.}}]] (0)
  8. [[:Category:Lua error: Internal error: The interpreter exited with status 127.|{{#if:|{{{name}}}|Category:Lua error: Internal error: The interpreter exited with status 127.}}]] (0)
  9. [[:Category:Lua error: Internal error: The interpreter exited with status 127.|{{#if:|{{{name}}}|Category:Lua error: Internal error: The interpreter exited with status 127.}}]] (0)
  10. [[:Category:Lua error: Internal error: The interpreter exited with status 127.|{{#if:|{{{name}}}|Category:Lua error: Internal error: The interpreter exited with status 127.}}]] (0)
  11. [[:Category:Lua error: Internal error: The interpreter exited with status 127.|{{#if:|{{{name}}}|Category:Lua error: Internal error: The interpreter exited with status 127.}}]] (0)
  12. [[:Category:Lua error: Internal error: The interpreter exited with status 127.|{{#if:|{{{name}}}|Category:Lua error: Internal error: The interpreter exited with status 127.}}]] (0)
  13. [[:Category:Lua error: Internal error: The interpreter exited with status 127.|{{#if:|{{{name}}}|Category:Lua error: Internal error: The interpreter exited with status 127.}}]] (0)
  14. [[:Category:Lua error: Internal error: The interpreter exited with status 127.|{{#if:|{{{name}}}|Category:Lua error: Internal error: The interpreter exited with status 127.}}]] (0)
  15. [[:Category:Lua error: Internal error: The interpreter exited with status 127.|{{#if:|{{{name}}}|Category:Lua error: Internal error: The interpreter exited with status 127.}}]] (0)


Retrieved from "https://newterritorieswiki.com/wiki/index.php?title=Template:Infobox_settlement/doc&oldid=381"